Humsienk PULSAR 48V 6200W čisti sinusni inverter
Održavajte svoj dom u pogonu tijekom nestanka struje uz stabilnu Izlazna snaga čistog sinusnog vala od 6200 W za svakodnevne uređaje i bitna opterećenja. Inverter podržava do Snaga fotonaponskog panela od 8000 W, do Ukupna struja punjenja 120A, i fleksibilan ulaz napajanja iz solarne energije, baterija, komunalnih usluga ili generatora, što ga čini prikladnim za kućne rezervne sustave i energetske sustave izvan mreže.
- Izlazna snaga čistog sinusnog vala od 6200 W: Stabilno napajanje od 220 V, 230 V ili 240 V AC za kućanske aparate i osjetljivu elektroniku.
- Snaga fotonaponskog panela do 8000 W: Podržava veliki solarni panel za visok unos solarne energije.
- Ukupna struja punjenja 120A: Podržava punjenje do 120A za kompatibilne 48V baterijske sustave.
- Prenaponska snaga od 12400 W: Pruža do dvostruko veću nazivnu izlaznu snagu do 5 sekundi za podršku početnim opterećenjima.
- Izlazi s dvostrukim opterećenjem: Podržava odvojene glavne i sekundarne izlaze opterećenja, s sekundarnim izlazom koji se može konfigurirati od 1240 W do 4340 W.
- Fleksibilni izvori napajanja: Podržava solarno, baterijsko, komunalno i generatorsko napajanje za rezervne i neovisne primjene.
-
Pametna komunikacija & Praćenje: Podržava RS485 komunikaciju. Za opcionalno Wi-Fi/GPRS praćenje potreban je dodatni modul.
Choose Your Backup Scenario
Select the right battery bundle based on your home backup needs.
| Backup Scenario | Typical Devices | Power Demand | Recommended Bundle | Battery Capacity |
|---|---|---|---|---|
| Essential Backup Short outages | Lights / Wi-Fi / Fridge / TV | Light Load Basic home backup | 5.12 kWh | |
| Daily Home Backup Longer outages | Fridge / Freezer / Office / Pump / Small Appliances | Medium Load Daily home use | 16.08 kWh | |
| Maximum Runtime Heavy backup | Large Home / Water Pump / Power Tools / Off-grid | Heavy Load Long backup time | 20.48 kWh |
💡 Tip: Click any recommended battery bundle above to view the matching option.
Estimate Your Backup Time
Choose a common home load or enter your own power usage to estimate how long each 48V battery can keep your system running.
Choose Your Power Load
Not sure? Start with one of the common home-use presets below.
Estimated runtime = battery capacity × 90% usable energy ÷ power load.
100Ah Rack Battery
5.12kWh · Rack-mounted starter backup
100Ah Wall-Mounted Battery
5.12kWh · Clean wall-mounted setup
314Ah Wall-Mounted Battery
16.08kWh · Whole-home essentials
400Ah Wall-Mounted Battery
20.48kWh · Maximum runtime
Estimated runtime is for reference only. Actual performance may vary depending on appliance power, inverter efficiency, battery settings, temperature, and installation conditions.
Specification
General
| Model | HSINV48V6K2W220-SRC-EU |
| Phase | Single Phase |
| Dimensions (L × W × H) | 14.09 × 4.57 × 17.40 in / 358 × 116 × 442 mm |
| Net Weight | Approx. 8.9 kg / 19.62 lb |
| Operating Temperature | 14°F to 122°F / -10°C to 50°C |
| Humidity | 5% to 95% RH, non-condensing |
| Installation | Wall-mounted |
| Compliance | CE |
Inverter Output
| Rated Output Power | 6200W / 6200VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 220V / 230V / 240V AC |
| Output Frequency | 50Hz |
| Surge Capacity | 12400W for up to 5 seconds |
| Peak Inverter Efficiency | 93% |
| No-Load Power Consumption | 50W |
| Main Load Output | Up to 6200W |
| Secondary Load Output | 1240W–4340W configurable range |
Solar Input
| Maximum PV Array Power | 8000W |
| MPPT Voltage Range | 60–450V DC |
| Maximum PV Open-Circuit Voltage | 500V DC |
| Nominal PV Voltage | 360V DC |
| Maximum Solar Charging Current | 120A |
Battery & Charging
| Nominal Battery Voltage | 48V DC |
| Maximum AC Charging Current | 100A |
| Maximum Solar + AC Charging Current | 120A |
| Charging Algorithm | 3-Stage Charging |
| Lithium Battery Communication | RS485 |
| Supported Battery Protocols | PYLON / PACE |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Recommended AC Breaker | 50A |
| Transfer Time | 10ms typical in UPS Mode / 20ms typical in Appliance Mode |
| Supported Power Sources | Solar, Battery, Utility and Generator |
| Operating Modes | On-Grid and Off-Grid |
| Dual Load Output | Main and secondary output control |
Communication & Protection
| Communication Ports | RS232 / RS485 |
| Wireless Monitoring | Optional Wi-Fi / GPRS module |
| Display | LCD display with function buttons |
| Load Outputs | Dual Output |
| Dust Protection | Built-in removable anti-dust kit |
| Overload Protection | Supported |
| Short-Circuit Protection | Supported |
| Over-Temperature Protection | Supported |
| Voltage Protection | High and low input/output voltage protection |
Product specifications are based on the latest technical documentation. Installation and grid connection must be completed in accordance with local regulations by qualified personnel.