Humsienk PULSAR 24V 4200W čisti sinusni inverter
Humsienk 24V 4.2kW Višenamjenski solarni inverter za vanjsku upotrebu besprijekorno povezuje solarnu energiju, baterije i mrežno napajanje kako bi osigurao da vaš dom ili kamper ostane pod naponom 24 sata dnevno, 7 dana u tjednu bez prekida. S vodećom tehnologijom u industriji Učinkovitost od 93% i ogroman ulazni PV kapacitet od 6200 W, Učinkovito eliminira sporo punjenje i veliku potrošnju energije. Bez obzira koristite li uređaje s visokim prenaponom ili osjetljivu elektroniku, inverter čistog sinusnog vala tehnologija pruža stabilnu i pouzdanu energiju. Ovaj kompaktni, lagani i tihi inverterski punjač je ultimativni izbor za postizanje istinske energetske neovisnosti i bezbrižnosti u bilo kojem okruženju.
Izlazna snaga čistog sinusnog vala od 4200 W: Pruža stabilnu izmjeničnu struju od 220 V, 230 V ili 240 V za kućanske aparate, radioničke alate i osjetljivu elektroniku.
Snaga fotonaponskog panela do 6200 W: Podržava veliki niz solarnih panela za jaču dnevnu proizvodnju i učinkovitije korištenje solarne energije.
Ukupna struja punjenja 120A: Pruža do 120A kombinirane struje punjenja solarnom i izmjeničnom strujom za kompatibilne 24V baterijske sustave.
Kapacitet prenapona 8400 W: Pruža dvostruko veći nazivni izlaz do 5 sekundi za podršku pumpama, hladnjacima i drugim opterećenjima pri pokretanju.
Izlazi s dvostrukim opterećenjem: Odvaja glavna i sekundarna opterećenja, s drugim izlazom koji se može konfigurirati od 840 W do 2940 W.
Fleksibilni izvori napajanja: Radi sa solarnom energijom, baterijama, napajanjem iz javne mreže ili generatorom za kućne rezervne i solarne energetske sustave.
Pametna komunikacija baterije: Podržava RS485 komunikaciju s kompatibilnim litijevim baterijama koristeći PYLON ili PACE protokole.
Choose Your 24V Power Setup
Pair your 24V 4200W inverter with the right battery setup for RVs, cabins, off-grid systems, and backup power.
| Power Scenario | Typical Devices | Power Demand | Recommended Battery Setup | Battery Capacity |
|---|---|---|---|---|
| Essential 24V Backup 5.12 kWh setup | Lights / Wi-Fi / Fridge / TV / Small Appliances | Light Load Daily essentials and basic backup | 5.12 kWh | |
| Longer Runtime Setup 8.19 kWh setup | Fridge / Freezer / Water Pump / Coffee Maker / Office Devices | Medium Load Longer runtime for RVs and cabins | 8.19 kWh | |
| Maximum Runtime 16.38 kWh setup | Power Tools / Water Pump / Large Appliances / Off-grid System | Heavy Load Maximum runtime with 12V batteries in series | 16.38 kWh |
💡 Tip: To build a 24V system with 12V batteries, connect two identical 12V batteries in series. Do not mix different models, capacities, ages, or charge levels.
Estimate Your 24V Backup Time
Choose a common load or enter your own power usage to estimate how long each 24V battery setup can keep your inverter running.
Choose Your Power Load
Not sure? Start with one of the common 24V inverter load presets below.
Estimated runtime = battery capacity × 90% usable energy ÷ power load.
5.12 kWh 24V Setup
Essential backup capacity for lights, fridge, Wi-Fi, TV, and daily appliances.
8.19 kWh 24V Setup
Longer runtime for RVs, cabins, pumps, office devices, and medium backup loads.
16.38 kWh 24V Setup
Maximum runtime for heavy off-grid backup, large appliances, water pumps, and longer use.
Estimated runtime is for reference only. Actual performance may vary depending on appliance power, inverter efficiency, battery settings, temperature, and installation conditions. For 12V battery setups, connect two identical 12V batteries in series to build a 24V system. Do not mix different models, capacities, ages, or charge levels.
Specification
General
| Model | HSINV24V4K2W220-SRB-EU |
| Phase | Single Phase |
| Dimensions (L × W × H) | 14.09 × 4.57 × 17.40 in / 358 × 116 × 442 mm |
| Net Weight | Approx. 8.0 kg / 17.64 lb |
| Operating Temperature | 14°F to 122°F / -10°C to 50°C |
| Storage Temperature | -15°C to 60°C |
| Humidity | 5% to 95% RH, non-condensing |
| Installation | Wall-mounted |
| Compliance | CE |
Inverter Output
| Rated Output Power | 4200W / 4200VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 220V / 230V / 240V AC |
| Output Voltage Regulation | 230V AC ±5% |
| Output Frequency | 50Hz |
| Surge Capacity | 8400W for up to 5 seconds |
| Peak Inverter Efficiency | 93% |
| No-Load Power Consumption | 35W |
| Main Load Output | Up to 4200W |
| Secondary Load Output | 840W–2940W configurable range |
Solar Input
| Maximum PV Array Power | 6200W |
| MPPT Voltage Range | 60–450V DC |
| Maximum PV Open-Circuit Voltage | 500V DC |
| Nominal PV Voltage | 240V DC |
| Maximum PV Input Current | 18A |
| Maximum Total Charging Current | 120A |
Battery & Charging
| Nominal Battery Voltage | 24V DC |
| Maximum AC Charging Current | 100A |
| Maximum Solar + AC Charging Current | 120A |
| Charging Algorithm | 3-Stage Charging |
| Default Bulk Charging Voltage | 28.2V |
| Default Float Charging Voltage | 27.0V |
| Lithium Battery Communication | RS485 |
| Supported Battery Protocols | PYLON / PACE |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Maximum AC Input Current | 30A |
| Recommended AC Breaker | 32A |
| Transfer Time | 10ms typical in UPS Mode / 20ms typical in Appliance Mode |
| Supported Power Sources | Solar, Battery, Utility and Generator |
| Operating Modes | On-Grid and Off-Grid |
| Dual Load Output | Main and secondary output control |
Communication & Protection
| Communication Ports | RS232 / RS485 |
| Wireless Monitoring | Optional Wi-Fi / GPRS module |
| Display | LCD display with function buttons |
| Load Outputs | Dual Output |
| Dust Protection | Built-in removable anti-dust kit |
| Overload Protection | Supported |
| Short-Circuit Protection | Supported |
| Over-Temperature Protection | Supported |
| Voltage Protection | High and low input/output voltage protection |
Product specifications are based on the latest technical documentation. Installation and grid connection must be completed in accordance with local regulations by qualified personnel.