Humsienk 12V RV & Off-Grid Power Kit — 2,56kWh LiFePO4 baterija s 1000W pretvaračem
Kompaktni komplet za napajanje od 12 V od 2,56 kWh s 12V 200Ah Plus LiFePO4 baterija i Inverter čistog sinusnog vala od 1000 W. Napravljen za kampere, brodove, kampiranje, kabine i rezervne potrepštine, pomaže vam napajati svakodnevne uređaje male snage, a istovremeno podržava solarno punjenje za korištenje izvan mreže.
- Komplet za napajanje od 2,56 kWh 12 V — Uključuje 12V 200Ah Plus LiFePO4 bateriju i 1000W inverter čistog sinusnog vala.
- Stabilan Izlazna snaga od 1000 W — Inverter osigurava 230 V AC čiste sinusne struje za svakodnevne uređaje male snage.
- 600W MPPT solarno punjenje — Inverter podržava PV ulaz do 600 W s MPPT rasponom od 20–150 VDC.
- 12V 200Ah Plus baterija — LiFePO4 baterija od 2560 Wh s 250A maks. kontinuirana struja pražnjenja i IP65 zaštita.
- Fleksibilne mogućnosti punjenja – Podržava solarno punjenje, AC punjenje i kombinirano AC + solarno punjenje do 80A.
- Za male potrebe za napajanjem izvan mreže — Pogodno za kampere, brodove, solarne energetske sustave, kućno skladištenje i korištenje izvan mreže.
- Certificirana zaštita baterije — Baterija ispunjava CE, RoHS, UN38.3 i ECE R10 standardi.
- 5-godišnje jamstvo na bateriju — Registrirajte svoju Humsienk bateriju za 5-godišnje jamstvo podrška.
What Can It Power?
Estimate how long the 12V 200Ah Plus battery can run your device with the 1000W pure sine wave inverter.
Estimated runtime only. Actual results may vary by load, startup power, battery condition and environment.
What’s Included & User Manuals
Check what comes with the 12V 200Ah Plus battery and 12V 1000W inverter, and download the user manuals before installation.
12V 200Ah Plus Battery Package
Based on the battery user manual packing list.
- Battery × 1
- Screw × 4
- Specification × 1
- Plastic Insulation Cap × 2
12V 1000W Inverter Package
Based on the inverter user manual unpacking list.
- The Unit × 1
- User Manual × 1
- U-Terminal × 2
Package contents are listed according to the product user manuals. Cables and additional installation accessories are not included unless otherwise stated.
Specifications
12V 200Ah Plus Battery
| Battery Model | 12V 200Ah 250A Plus LiFePO4 Battery |
| Nominal Voltage | 12.8V |
| Capacity | 200Ah |
| Energy | 2,560Wh |
| Standard / Maximum Continuous Charging | 40A / 250A |
| Max Continuous Discharge Current | 250A |
| Recommended Charging Voltage | 14.6V ±0.2V LiFePO4 charger |
| Cycle Life | 6000 cycles @80% DOD |
| Self-Discharge Rate | ≤3% per month |
| Series & Parallel Connection | Max. 4 series / 4 parallel |
| Dimensions | 20.53 × 9.37 × 8.69 in / 52.1 × 23.8 × 22.1 cm |
| Weight | 58.2 lb ±3% / 26.4 kg ±3% |
| Protection Rating | IP65 |
| Case Material | ABS+PC / UL94-V0 |
| Terminal Bolt Size | M8 |
| Battery Pack Certifications | ECE R10 / IEC62133 / RoHS / CE / FCC / UN38.3 / Class 9 |
| Cell Certifications | UL1642 / UL2580 / UN38.3 |
12V 1000W Inverter Output
| Inverter Model | 1.0KW-12V |
| Rated Output Power | 1000W / 1000VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 230V AC ±5% |
| Output Frequency | 50Hz |
| Surge Capacity | 2× rated power for 1 second |
| Peak Inverter Efficiency | 94% |
| No-Load Power Consumption | <28W |
| Nominal DC Input Voltage | 12V DC |
| Low DC Cut-Off Voltage | 10.75V at load below 50% / 10.5V at load of 50% or above |
| High DC Cut-Off Voltage | 16.0V |
Solar & Charging
| Charging Algorithm | 3-Stage Charging |
| Maximum AC Charging Current | 40A |
| Bulk Charging Voltage | 14.6V for flooded battery / 14.1V for AGM or gel battery |
| Floating Charging Voltage | 13.5V DC |
| Solar Charger Type | MPPT |
| Maximum PV Array Power | 600W |
| MPPT Voltage Range | 20–150V DC |
| Maximum PV Open-Circuit Voltage | 150V DC |
| Maximum Solar Charging Current | 40A |
| Maximum AC + Solar Charging Current | 80A |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Input Voltage Waveform | Sinusoidal, utility or generator |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Maximum AC Input Voltage | 300V AC |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Transfer Time | 10ms |
| Output Source Priorities | Utility First / Solar First / SBU Priority / MKS Priority |
| Charging Source Priorities | Solar First / Solar and Utility / Solar Only |
General & Protection
| Safety Certification | CE |
| Inverter Dimensions | 284 × 240 × 91 mm / 28.4 × 24.0 × 9.1 cm |
| Inverter Net Weight | 3.3 kg / 7.28 lb |
| Operating Temperature Range | -10°C to 50°C |
| Storage Temperature | -15°C to 60°C |
| Humidity | 5% to 95% relative humidity, non-condensing |
| Display | LCD display with function buttons |
| Output Short-Circuit Protection | Circuit breaker |
| Overload Protection | 3 seconds at ≥150% load / 5 seconds at 101%–150% load |
| Automatic Restart After Overload | Configurable |
| Automatic Restart After Over-Temperature | Configurable |
Specifications are based on the product user manuals. ECE R10 certification applies to the 12V 200Ah Plus battery. Runtime and output performance may vary depending on appliance power, startup load, wiring, battery condition and installation environment.