Humsienk PULSAR 48V 6200W Pure Sine Wave Inverter
Hold dit hjem kørende under afbrydelser med stabil 6200W ren sinusbølgeudgang til hverdagsapparater og essentielle belastninger. Inverteren understøtter op til 8000 W PV-paneleffekt, op til 120A samlet ladestrøm, og fleksibel strømtilførsel fra solceller, batterier, forsyningsselskaber eller en generator, hvilket gør den velegnet til backup i hjemmet og off-grid energisystemer.
- 6200W ren sinusbølgeudgang: Stabil 220V, 230V eller 240V vekselstrøm til husholdningsapparater og følsom elektronik.
- Op til 8000W PV-paneleffekt: Understøtter et stort solpanel til høj solenergitilførsel.
- 120A samlet ladestrøm: Understøtter op til 120A opladning til kompatible 48V batterisystemer.
- 12400W overspændingseffekt: Yder op til dobbelt så høj nominel effekt i op til 5 sekunder for at understøtte opstartsbelastninger.
- Dobbeltbelastningsudgange: Understøtter separate hoved- og sekundære belastningsudgange, hvor den sekundære udgang kan konfigureres fra 1240 W til 4340 W.
- Fleksible strømkilder: Understøtter sol-, batteri-, forsynings- og generatorstrøm til backup- og off-grid-applikationer.
-
Smart kommunikation & Overvågning: Understøtter RS485-kommunikation. Valgfri Wi-Fi/GPRS-overvågning kræver et ekstra modul.
Choose Your Backup Scenario
Select the right battery bundle based on your home backup needs.
| Backup Scenario | Typical Devices | Power Demand | Recommended Bundle | Battery Capacity |
|---|---|---|---|---|
| Essential Backup Short outages | Lights / Wi-Fi / Fridge / TV | Light Load Basic home backup | 5.12 kWh | |
| Daily Home Backup Longer outages | Fridge / Freezer / Office / Pump / Small Appliances | Medium Load Daily home use | 16.08 kWh | |
| Maximum Runtime Heavy backup | Large Home / Water Pump / Power Tools / Off-grid | Heavy Load Long backup time | 20.48 kWh |
💡 Tip: Click any recommended battery bundle above to view the matching option.
Estimate Your Backup Time
Choose a common home load or enter your own power usage to estimate how long each 48V battery can keep your system running.
Choose Your Power Load
Not sure? Start with one of the common home-use presets below.
Estimated runtime = battery capacity × 90% usable energy ÷ power load.
100Ah Rack Battery
5.12kWh · Rack-mounted starter backup
100Ah Wall-Mounted Battery
5.12kWh · Clean wall-mounted setup
314Ah Wall-Mounted Battery
16.08kWh · Whole-home essentials
400Ah Wall-Mounted Battery
20.48kWh · Maximum runtime
Estimated runtime is for reference only. Actual performance may vary depending on appliance power, inverter efficiency, battery settings, temperature, and installation conditions.
Specification
General
| Model | HSINV48V6K2W220-SRC-EU |
| Phase | Single Phase |
| Dimensions (L × W × H) | 14.09 × 4.57 × 17.40 in / 358 × 116 × 442 mm |
| Net Weight | Approx. 8.9 kg / 19.62 lb |
| Operating Temperature | 14°F to 122°F / -10°C to 50°C |
| Humidity | 5% to 95% RH, non-condensing |
| Installation | Wall-mounted |
| Compliance | CE |
Inverter Output
| Rated Output Power | 6200W / 6200VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 220V / 230V / 240V AC |
| Output Frequency | 50Hz |
| Surge Capacity | 12400W for up to 5 seconds |
| Peak Inverter Efficiency | 93% |
| No-Load Power Consumption | 50W |
| Main Load Output | Up to 6200W |
| Secondary Load Output | 1240W–4340W configurable range |
Solar Input
| Maximum PV Array Power | 8000W |
| MPPT Voltage Range | 60–450V DC |
| Maximum PV Open-Circuit Voltage | 500V DC |
| Nominal PV Voltage | 360V DC |
| Maximum Solar Charging Current | 120A |
Battery & Charging
| Nominal Battery Voltage | 48V DC |
| Maximum AC Charging Current | 100A |
| Maximum Solar + AC Charging Current | 120A |
| Charging Algorithm | 3-Stage Charging |
| Lithium Battery Communication | RS485 |
| Supported Battery Protocols | PYLON / PACE |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Recommended AC Breaker | 50A |
| Transfer Time | 10ms typical in UPS Mode / 20ms typical in Appliance Mode |
| Supported Power Sources | Solar, Battery, Utility and Generator |
| Operating Modes | On-Grid and Off-Grid |
| Dual Load Output | Main and secondary output control |
Communication & Protection
| Communication Ports | RS232 / RS485 |
| Wireless Monitoring | Optional Wi-Fi / GPRS module |
| Display | LCD display with function buttons |
| Load Outputs | Dual Output |
| Dust Protection | Built-in removable anti-dust kit |
| Overload Protection | Supported |
| Short-Circuit Protection | Supported |
| Over-Temperature Protection | Supported |
| Voltage Protection | High and low input/output voltage protection |
Product specifications are based on the latest technical documentation. Installation and grid connection must be completed in accordance with local regulations by qualified personnel.