Humsienk PULSAR 24V 4200W Pure Sine Wave Inverter
Denne 24V 4200W ren sinusbølgeinverter er designet til hjem, hytter og små værksteder og holder vigtige apparater og værktøj kørende med stabil vekselstrøm. Den understøtter op til 6200 W PV-paneleffekt, 120A total opladning og fleksibel indgang fra solenergi, forsyningsselskaber eller en generator, hvilket gør det til et praktisk valg til backup- og solenergisystemer.
4200W ren sinusbølgeudgang: Leverer stabil 220V, 230V eller 240V vekselstrøm til husholdningsapparater, værkstedsværktøj og følsom elektronik.
Op til 6200W PV-array-effekt: Understøtter et stort solpanelanlæg for stærkere produktion i dagtimerne og mere effektiv udnyttelse af solenergi.
120A samlet ladestrøm: Giver op til 120A kombineret sol- og AC-ladestrøm til kompatible 24V batterisystemer.
8400W overspændingskapacitet: Leverer dobbelt så høj nominel effekt i op til 5 sekunder for at understøtte pumper, køleskabe og andre opstartsbelastninger.
Dobbeltbelastningsudgange: Adskiller hoved- og sekundærbelastninger, hvor den anden udgang kan konfigureres fra 840 W til 2940 W.
Fleksible strømkilder: Fungerer med solceller, batterier, strøm fra elnettet eller en generator til backup i hjemmet og solenergisystemer.
Smart batterikommunikation: Understøtter RS485-kommunikation med kompatible litiumbatterier ved hjælp af PYLON- eller PACE-protokoller.
Choose Your 24V Power Setup
Pair your 24V 4200W inverter with the right battery setup for RVs, cabins, off-grid systems, and backup power.
| Power Scenario | Typical Devices | Power Demand | Recommended Battery Setup | Battery Capacity |
|---|---|---|---|---|
| Essential 24V Backup 5.12 kWh setup | Lights / Wi-Fi / Fridge / TV / Small Appliances | Light Load Daily essentials and basic backup | 5.12 kWh | |
| Longer Runtime Setup 8.19 kWh setup | Fridge / Freezer / Water Pump / Coffee Maker / Office Devices | Medium Load Longer runtime for RVs and cabins | 8.19 kWh | |
| Maximum Runtime 16.38 kWh setup | Power Tools / Water Pump / Large Appliances / Off-grid System | Heavy Load Maximum runtime with 12V batteries in series | 16.38 kWh |
💡 Tip: To build a 24V system with 12V batteries, connect two identical 12V batteries in series. Do not mix different models, capacities, ages, or charge levels.
Estimate Your 24V Backup Time
Choose a common load or enter your own power usage to estimate how long each 24V battery setup can keep your inverter running.
Choose Your Power Load
Not sure? Start with one of the common 24V inverter load presets below.
Estimated runtime = battery capacity × 90% usable energy ÷ power load.
5.12 kWh 24V Setup
Essential backup capacity for lights, fridge, Wi-Fi, TV, and daily appliances.
8.19 kWh 24V Setup
Longer runtime for RVs, cabins, pumps, office devices, and medium backup loads.
16.38 kWh 24V Setup
Maximum runtime for heavy off-grid backup, large appliances, water pumps, and longer use.
Estimated runtime is for reference only. Actual performance may vary depending on appliance power, inverter efficiency, battery settings, temperature, and installation conditions. For 12V battery setups, connect two identical 12V batteries in series to build a 24V system. Do not mix different models, capacities, ages, or charge levels.
Specification
General
| Model | HSINV24V4K2W220-SRB-EU |
| Phase | Single Phase |
| Dimensions (L × W × H) | 14.09 × 4.57 × 17.40 in / 358 × 116 × 442 mm |
| Net Weight | Approx. 8.0 kg / 17.64 lb |
| Operating Temperature | 14°F to 122°F / -10°C to 50°C |
| Storage Temperature | -15°C to 60°C |
| Humidity | 5% to 95% RH, non-condensing |
| Installation | Wall-mounted |
| Compliance | CE |
Inverter Output
| Rated Output Power | 4200W / 4200VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 220V / 230V / 240V AC |
| Output Voltage Regulation | 230V AC ±5% |
| Output Frequency | 50Hz |
| Surge Capacity | 8400W for up to 5 seconds |
| Peak Inverter Efficiency | 93% |
| No-Load Power Consumption | 35W |
| Main Load Output | Up to 4200W |
| Secondary Load Output | 840W–2940W configurable range |
Solar Input
| Maximum PV Array Power | 6200W |
| MPPT Voltage Range | 60–450V DC |
| Maximum PV Open-Circuit Voltage | 500V DC |
| Nominal PV Voltage | 240V DC |
| Maximum PV Input Current | 18A |
| Maximum Total Charging Current | 120A |
Battery & Charging
| Nominal Battery Voltage | 24V DC |
| Maximum AC Charging Current | 100A |
| Maximum Solar + AC Charging Current | 120A |
| Charging Algorithm | 3-Stage Charging |
| Default Bulk Charging Voltage | 28.2V |
| Default Float Charging Voltage | 27.0V |
| Lithium Battery Communication | RS485 |
| Supported Battery Protocols | PYLON / PACE |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Maximum AC Input Current | 30A |
| Recommended AC Breaker | 32A |
| Transfer Time | 10ms typical in UPS Mode / 20ms typical in Appliance Mode |
| Supported Power Sources | Solar, Battery, Utility and Generator |
| Operating Modes | On-Grid and Off-Grid |
| Dual Load Output | Main and secondary output control |
Communication & Protection
| Communication Ports | RS232 / RS485 |
| Wireless Monitoring | Optional Wi-Fi / GPRS module |
| Display | LCD display with function buttons |
| Load Outputs | Dual Output |
| Dust Protection | Built-in removable anti-dust kit |
| Overload Protection | Supported |
| Short-Circuit Protection | Supported |
| Over-Temperature Protection | Supported |
| Voltage Protection | High and low input/output voltage protection |
Product specifications are based on the latest technical documentation. Installation and grid connection must be completed in accordance with local regulations by qualified personnel.