Humsienk PULSAR 12V 1000W zuivere sinusomvormer
Deze compacte 12V off-grid zonne-omvormer combineert een Zuivere sinusgolfomvormer, MPPT-controller en acculader in één stijlvol apparaat. 3,3 kg unit. Of u nu een koelkast in uw camper gebruikt of noodpompen thuis, onze hoogfrequente technologie levert tot 98% efficiëntie en een verbeterde 1500W AC+PV-uitgang. Stil, stabiel en geschikt voor LiFePO4 – professioneel DC-naar-AC-omvormer Prestaties zonder de omvang.
1000W zuivere sinusgolfuitgang: Levert stabiele 230V wisselstroom voor koelkasten, verlichting, laptops en gevoelige elektronica in campers, boten en kleine off-grid systemen.
Tot 600W vermogen van de zonnepanelen: Ondersteunt tot 600W aan aangesloten zonnepanelen voor efficiënte energieopwekking overdag.
40A MPPT-zonne-laadstation: De ingebouwde MPPT-regelaar biedt tot 40A zonne-laadvermogen voor compatibele 12V-accusystemen.
Totale laadstroom: 80A Ondersteunt een gecombineerde laadstroom van zonne-energie en het elektriciteitsnet tot 80A om de batterij sneller op te laden.
Piekvermogen van 2000W: Levert tweemaal het nominale uitgangsvermogen gedurende maximaal één seconde om korte opstartbelastingen van apparaten aan te kunnen.
Flexibele stroomprioriteit: Kies voor prioriteit voor netstroom, prioriteit voor zonne-energie of SBU-prioriteit om aan verschillende behoeften op het gebied van off-grid en noodstroomvoorziening te voldoen.
Compact ontwerp voor gebruik buiten het elektriciteitsnet: Het lichtgewicht ontwerp van 3,3 kg, dat aan de muur bevestigd kan worden, bespaart ruimte in campers, boten, hutten en kleine stroomsystemen.
Choose Your 12V Battery Setup
Pair your 12V 1000W inverter with the right 12V LiFePO4 battery for RVs, boats, camping, small appliances, and backup power.
| Power Scenario | Typical Devices | Power Demand | Recommended Battery Setup | Battery Capacity |
|---|---|---|---|---|
| Essential 12V Backup Basic backup use | Lights / Wi-Fi / Phone Charging / Small Fan / TV | Light Load For daily essentials and small devices | 1.28–2.05 kWh | |
| Extended Runtime Setup RV & camping power | Fridge / Freezer / TV / Laptop / Coffee Maker / Small Pump | Medium Load Longer backup time with more capacity | 2.56–4.02 kWh | |
| Maximum Runtime Large-capacity 12V backup | RV / Boat / Off-grid Cabin / Longer Backup Use / Multiple Appliances | Heavy Runtime Large 12V battery capacity for longer use | 4.10–8.19 kWh |
💡 Tip: This is a 12V inverter. Use a 12V battery system only. Do not connect batteries in series, as series connection increases the voltage to 24V or higher. For longer runtime, choose a larger 12V battery or connect identical 12V batteries in parallel only if supported by the battery manual.
Estimate Your 12V Backup Time
Choose a common load or enter your own power usage to estimate how long each 12V battery setup can keep your inverter running.
Choose Your Power Load
Not sure? Start with one of the common 12V inverter load presets below.
Estimated runtime = battery capacity × 90% usable energy ÷ power load.
Essential 12V Backup
Compact 12V capacity for lights, Wi-Fi, phone charging, small fans, and TV.
Extended Runtime Setup
More capacity for RVs, boats, camping, small pumps, laptops, and longer daily use.
Maximum Runtime
Large-capacity 12V backup for longer RV, marine, cabin, and off-grid use.
Estimated runtime is for reference only. Actual performance may vary depending on appliance power, inverter efficiency, battery settings, temperature, and installation conditions. This is a 12V inverter. Use a 12V battery system only. Do not connect batteries in series, as series connection increases the voltage to 24V or higher.
Specification
General
| Model | HSINV12V1KW220-SRA-EU |
| Dimensions (L × W × H) | 9.45 × 3.58 × 11.26 in / 240 × 91 × 286 mm |
| Net Weight | Approx. 3.3 kg / 7.28 lb |
| Operating Temperature | 14°F to 122°F / -10°C to 50°C |
| Storage Temperature | -15°C to 60°C |
| Humidity | 5% to 95% RH, non-condensing |
| Installation | Wall-mounted |
| Compliance | CE |
Inverter Output
| Rated Output Power | 1000W / 1000VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 230V AC ±5% |
| Output Frequency | 50Hz |
| Surge Capacity | 2000W for up to 1 second |
| Peak Inverter Efficiency | 94% |
| No-Load Power Consumption | Less than 28W |
| Overload Protection | 3 seconds at ≥150% load / 5 seconds at 101%–150% load |
| Output Short-Circuit Protection | Circuit breaker |
Solar Input
| Maximum PV Array Power | 600W |
| Solar Charger Type | MPPT |
| MPPT Voltage Range | 20–150V DC |
| Maximum PV Open-Circuit Voltage | 150V DC |
| Maximum Solar Charging Current | 40A |
Battery & Charging
| Nominal Battery Voltage | 12V DC |
| Maximum AC Charging Current | 40A |
| Maximum Solar + AC Charging Current | 80A |
| Charging Algorithm | 3-Stage Charging |
| Default Bulk Charging Voltage | 14.1V |
| Default Float Charging Voltage | 13.5V |
| Low DC Cut-Off Voltage | 10.75V at load below 50% / 10.5V at load of 50% or above |
| High DC Cut-Off Voltage | 16.0V |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Maximum AC Input Voltage | 300V AC |
| Transfer Time | 10ms |
| Supported Power Sources | Solar, Battery, Utility and Generator |
| Output Source Priorities | Utility First / Solar First / SBU Priority / MKS Priority |
| Charging Source Priorities | Solar First / Solar and Utility / Solar Only |
Display & Protection
| Display | LCD display with function buttons |
| AC Output Connection | Hardwired AC output and built-in output receptacles |
| Anti-Dust Kit | Optional removable anti-dust filter |
| Automatic Restart After Overload | Configurable |
| Automatic Restart After Over-Temperature | Configurable |
| Over-Temperature Protection | Supported |
| Short-Circuit Protection | Supported |
| High and Low Voltage Protection | Supported |
| Fault and Warning Display | LCD fault codes with audible alarm |
Product specifications are based on the latest available technical documentation. Installation must be completed by qualified personnel in accordance with local electrical and safety regulations.