Humsienk PULSAR 48V 6200W zuivere sinusomvormer
Zorg dat uw huis blijft functioneren tijdens stroomuitval met stabiele stroomvoorziening. 6200W zuivere sinusgolfuitgang voor alledaagse apparaten en essentiële belastingen. De inverter ondersteunt tot 8000W aan zonnepanelen, tot Totale laadstroom: 120A, en flexibele stroomvoorziening via zonne-energie, batterijen, het elektriciteitsnet of een generator, waardoor het geschikt is voor noodstroomvoorziening thuis en energievoorzieningssystemen die niet op het net zijn aangesloten.
- 6200W zuivere sinusgolfuitgang: Stabiele wisselstroom van 220V, 230V of 240V voor huishoudelijke apparaten en gevoelige elektronica.
- Tot 8000W vermogen van de zonnepanelen: Geschikt voor een grote zonnepaneleninstallatie voor een hoge zonne-energieopbrengst.
- Totale laadstroom: 120A Ondersteunt laadvermogens tot 120A voor compatibele 48V-accusystemen.
- 12400W piekvermogen: Levert tot tweemaal het nominale vermogen gedurende maximaal 5 seconden ter ondersteuning van de opstartbelasting.
- Dubbele belastingsuitgangen: Ondersteunt aparte hoofd- en secundaire belastinguitgangen, waarbij de secundaire uitgang configureerbaar is van 1240W tot 4340W.
- Flexibele stroombronnen: Geschikt voor zonne-energie, batterijen, netstroom en generatoren voor noodstroomvoorziening en toepassingen buiten het elektriciteitsnet.
-
Slimme communicatie & Monitoring: Ondersteunt RS485-communicatie. Optionele Wi-Fi/GPRS-monitoring vereist een extra module.
Choose Your Backup Scenario
Select the right battery bundle based on your home backup needs.
| Backup Scenario | Typical Devices | Power Demand | Recommended Bundle | Battery Capacity |
|---|---|---|---|---|
| Essential Backup Short outages | Lights / Wi-Fi / Fridge / TV | Light Load Basic home backup | 5.12 kWh | |
| Daily Home Backup Longer outages | Fridge / Freezer / Office / Pump / Small Appliances | Medium Load Daily home use | 16.08 kWh | |
| Maximum Runtime Heavy backup | Large Home / Water Pump / Power Tools / Off-grid | Heavy Load Long backup time | 20.48 kWh |
💡 Tip: Click any recommended battery bundle above to view the matching option.
Estimate Your Backup Time
Choose a common home load or enter your own power usage to estimate how long each 48V battery can keep your system running.
Choose Your Power Load
Not sure? Start with one of the common home-use presets below.
Estimated runtime = battery capacity × 90% usable energy ÷ power load.
100Ah Rack Battery
5.12kWh · Rack-mounted starter backup
100Ah Wall-Mounted Battery
5.12kWh · Clean wall-mounted setup
314Ah Wall-Mounted Battery
16.08kWh · Whole-home essentials
400Ah Wall-Mounted Battery
20.48kWh · Maximum runtime
Estimated runtime is for reference only. Actual performance may vary depending on appliance power, inverter efficiency, battery settings, temperature, and installation conditions.
Specification
General
| Model | HSINV48V6K2W220-SRC-EU |
| Phase | Single Phase |
| Dimensions (L × W × H) | 14.09 × 4.57 × 17.40 in / 358 × 116 × 442 mm |
| Net Weight | Approx. 8.9 kg / 19.62 lb |
| Operating Temperature | 14°F to 122°F / -10°C to 50°C |
| Humidity | 5% to 95% RH, non-condensing |
| Installation | Wall-mounted |
| Compliance | CE |
Inverter Output
| Rated Output Power | 6200W / 6200VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 220V / 230V / 240V AC |
| Output Frequency | 50Hz |
| Surge Capacity | 12400W for up to 5 seconds |
| Peak Inverter Efficiency | 93% |
| No-Load Power Consumption | 50W |
| Main Load Output | Up to 6200W |
| Secondary Load Output | 1240W–4340W configurable range |
Solar Input
| Maximum PV Array Power | 8000W |
| MPPT Voltage Range | 60–450V DC |
| Maximum PV Open-Circuit Voltage | 500V DC |
| Nominal PV Voltage | 360V DC |
| Maximum Solar Charging Current | 120A |
Battery & Charging
| Nominal Battery Voltage | 48V DC |
| Maximum AC Charging Current | 100A |
| Maximum Solar + AC Charging Current | 120A |
| Charging Algorithm | 3-Stage Charging |
| Lithium Battery Communication | RS485 |
| Supported Battery Protocols | PYLON / PACE |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Recommended AC Breaker | 50A |
| Transfer Time | 10ms typical in UPS Mode / 20ms typical in Appliance Mode |
| Supported Power Sources | Solar, Battery, Utility and Generator |
| Operating Modes | On-Grid and Off-Grid |
| Dual Load Output | Main and secondary output control |
Communication & Protection
| Communication Ports | RS232 / RS485 |
| Wireless Monitoring | Optional Wi-Fi / GPRS module |
| Display | LCD display with function buttons |
| Load Outputs | Dual Output |
| Dust Protection | Built-in removable anti-dust kit |
| Overload Protection | Supported |
| Short-Circuit Protection | Supported |
| Over-Temperature Protection | Supported |
| Voltage Protection | High and low input/output voltage protection |
Product specifications are based on the latest technical documentation. Installation and grid connection must be completed in accordance with local regulations by qualified personnel.