Humsienk PULSAR 48V 6200W puhdas siniaaltoinvertteri
Pidä kotisi toiminnassa sähkökatkosten aikana ja anna virtaa jokapäiväisille laitteille, työkaluille ja tärkeille kuormille vakaalla 6200 W:n puhdas siniaaltoteho. Järjestelmä tukee jopa 8000 W aurinkoenergiaa, nopeasti 120 A lataus ja joustavaa virtaa aurinkoenergiasta, akuista, sähköverkosta tai generaattorista, mikä tekee siitä sopivan kodin varmuuskopiointiin ja sähköverkon ulkopuoliseen energiankäyttöön.
- 6200 W:n puhdas siniaaltoteho: Vakaa 220 V, 230 V tai 240 V vaihtovirta kodinkoneille, työkaluille ja herkälle elektroniikalle.
- Jopa 8000 W:n aurinkoenergian syöttö: Tukee suurta aurinkopaneelijärjestelmää nopeampaa energiankeruuta ja parannettua aurinkojärjestelmän suorituskykyä varten.
- 120A pikalataus: Tarjoaa jopa 120 A:n kokonaislatausvirran yhteensopiville 48 V:n akkujärjestelmille.
- 12400 W:n ylijännitesuoja: Käsittelee lyhyitä käynnistysjännitteen nousuja pumpuista, jääkaapeista ja muista moottorikäyttöisistä laitteista.
- Kaksoiskuormituslähdöt: Erottaa olennaiset ja toissijaiset kuormat älykkäämpää akun ja virran hallintaa varten.
- Joustavat virtalähteet: Toimii aurinkopaneelien, akkujen, verkkovirran ja generaattoreiden kanssa vara- ja aurinkoenergiajärjestelmissä.
- Älykäs järjestelmän valvonta: Tukee RS485-litiumparistotiedonsiirtoa ja valinnaista Wi-Fi-sovelluksen valvontaa.
Choose Your Backup Scenario
Select the right battery bundle based on your home backup needs.
| Backup Scenario | Typical Devices | Power Demand | Recommended Bundle | Battery Capacity |
|---|---|---|---|---|
| Essential Backup Short outages | Lights / Wi-Fi / Fridge / TV | Light Load Basic home backup | 5.12 kWh | |
| Daily Home Backup Longer outages | Fridge / Freezer / Office / Pump / Small Appliances | Medium Load Daily home use | 16.08 kWh | |
| Maximum Runtime Heavy backup | Large Home / Water Pump / Power Tools / Off-grid | Heavy Load Long backup time | 20.48 kWh |
💡 Tip: Click any recommended battery bundle above to view the matching option.
Estimate Your Backup Time
Choose a common home load or enter your own power usage to estimate how long each 48V battery can keep your system running.
Choose Your Power Load
Not sure? Start with one of the common home-use presets below.
Estimated runtime = battery capacity × 90% usable energy ÷ power load.
100Ah Rack Battery
5.12kWh · Rack-mounted starter backup
100Ah Wall-Mounted Battery
5.12kWh · Clean wall-mounted setup
314Ah Wall-Mounted Battery
16.08kWh · Whole-home essentials
400Ah Wall-Mounted Battery
20.48kWh · Maximum runtime
Estimated runtime is for reference only. Actual performance may vary depending on appliance power, inverter efficiency, battery settings, temperature, and installation conditions.
Specification
General
| Model | HSINV48V6K2W220-SRC-EU |
| Phase | Single Phase |
| Dimensions (L × W × H) | 14.09 × 4.57 × 17.40 in / 358 × 116 × 442 mm |
| Net Weight | Approx. 8.9 kg / 19.62 lb |
| Operating Temperature | 14°F to 122°F / -10°C to 50°C |
| Humidity | 5% to 95% RH, non-condensing |
| Installation | Wall-mounted |
| Compliance | CE |
Inverter Output
| Rated Output Power | 6200W / 6200VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 220V / 230V / 240V AC |
| Output Frequency | 50Hz |
| Surge Capacity | 12400W for up to 5 seconds |
| Peak Inverter Efficiency | 93% |
| No-Load Power Consumption | 50W |
| Main Load Output | Up to 6200W |
| Secondary Load Output | Up to 2067W in battery mode |
Solar Input
| Maximum PV Array Power | 8000W |
| MPPT Voltage Range | 60–450V DC |
| Maximum PV Open-Circuit Voltage | 500V DC |
| Nominal PV Voltage | 360V DC |
| Maximum PV Input Current | 22A |
| Maximum Solar Charging Current | 120A |
Battery & Charging
| Nominal Battery Voltage | 48V DC |
| Maximum AC Charging Current | 100A |
| Maximum Solar + AC Charging Current | 120A |
| Charging Algorithm | 3-Stage Charging |
| Lithium Battery Communication | RS485 |
| Supported Battery Protocols | PYLON / PACE |
| Battery-Free Operation | Supported under compatible input conditions |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Maximum AC Input Current | 40A |
| Transfer Time | 10ms typical in UPS Mode / 20ms typical in Appliance Mode |
| Supported Power Sources | Solar, Battery, Utility and Generator |
| Operating Modes | On-Grid and Off-Grid |
| Dual Load Output | Main and secondary output control |
Communication & Protection
| Communication Ports | RS232 / RS485 |
| Wireless Monitoring | Optional Wi-Fi / GPRS module |
| Display | LCD display with function buttons |
| Load Outputs | Dual Output |
| Dust Protection | Built-in removable anti-dust kit |
| Overload Protection | Supported |
| Short-Circuit Protection | Supported |
| Over-Temperature Protection | Supported |
| Voltage Protection | High and low input/output voltage protection |
Product specifications are based on the latest technical documentation. Installation and grid connection must be completed in accordance with local regulations by qualified personnel.