Inversor Humsienk PULSAR 12V 1000W Onda Sinusoidal Pura
Diseñado para autocaravanas, barcos y pequeñas instalaciones aisladas, este inversor de onda sinusoidal pura de 12 V y 1000 W proporciona energía estable para frigoríficos, iluminación, ordenadores portátiles y dispositivos electrónicos de uso diario. Su controlador MPPT integrado admite arriba a 600 W de paneles solares, Mientras tanto, la carga eléctrica y solar mantienen la batería lista.
- Salida de onda sinusoidal pura de 1000 W: Proporciona alimentación de CA estable de 230 V para frigoríficos, iluminación, ordenadores portátiles y aparatos electrónicos sensibles en autocaravanas, barcos y pequeños sistemas aislados de la red eléctrica.
- Potencia del conjunto fotovoltaico de hasta 600 W: Admite hasta 600 W de paneles solares conectados para una eficiente captación de energía durante el día.
- Carga solar MPPT de 40 A: El controlador MPPT integrado proporciona hasta 40 A de carga solar para sistemas de baterías de 12 V compatibles.
- Corriente de carga total de 80 A: Admite una carga combinada solar y eléctrica de hasta 80 A para ayudar a recargar la batería más rápidamente.
- Capacidad de sobretensión de 2000 W: Proporciona el doble de la potencia de salida nominal durante un máximo de un segundo para gestionar las cargas de arranque breves de los electrodomésticos.
- Prioridad de energía flexible: Seleccione la prioridad "primero la red eléctrica", "primero la energía solar" o "SBU" para satisfacer las diferentes necesidades de energía fuera de la red y de respaldo.
- Diseño compacto para sistemas autónomos: Su diseño ligero de 3,3 kg para montaje en pared ahorra espacio en autocaravanas, barcos, cabañas y pequeños sistemas de alimentación.
Choose Your 12V Battery Setup
Pair your 12V 1000W inverter with the right 12V LiFePO4 battery for RVs, boats, camping, small appliances, and backup power.
| Power Scenario | Typical Devices | Power Demand | Recommended Battery Setup | Battery Capacity |
|---|---|---|---|---|
| Essential 12V Backup Basic backup use | Lights / Wi-Fi / Phone Charging / Small Fan / TV | Light Load For daily essentials and small devices | 1.92 kWh | |
| Extended Runtime Setup RV & camping power | Fridge / Freezer / TV / Laptop / Coffee Maker / Small Pump | Medium Load Longer backup time with more capacity | 2.56 kWh | |
| Maximum Runtime Large-capacity 12V backup | RV / Boat / Off-grid Cabin / Longer Backup Use / Multiple Appliances | Heavy Runtime Large 12V battery capacity for longer use | 4.10 kWh |
💡 Tip: This is a 12V inverter. Use a 12V battery system only. Do not connect batteries in series, as series connection increases the voltage to 24V or higher. For longer runtime, choose a larger 12V battery or connect identical 12V batteries in parallel only if supported by the battery manual.
Estimate Your 12V Backup Time
Choose a common load or enter your own power usage to estimate how long each 12V battery setup can keep your inverter running.
Choose Your Power Load
Not sure? Start with one of the common 12V inverter load presets below.
Estimated runtime = nominal battery energy × 94% peak inverter efficiency ÷ power load.
Essential 12V Backup
Compact backup capacity for lights, Wi-Fi, phone charging, small fans, TV, and daily essentials.
Extended Runtime Setup
More capacity for RVs, boats, camping, refrigerators, laptops, and longer daily use.
Maximum Runtime
High-capacity 12V backup for longer RV, marine, cabin, and off-grid use.
Estimated runtime is for reference only and is calculated using nominal battery energy and the inverter's 94% peak efficiency. Actual runtime may vary depending on battery condition, battery settings, appliance load, operating temperature, wiring, and overall system efficiency. This is a 12V inverter. Use a 12V battery system only. Do not connect batteries in series, as series connection increases the voltage to 24V or higher.
Specification
General
| Model | HSINV12V1KW220-SRA-EU |
| Dimensions (D × W × H) | 284 × 240 × 91 mm / 28.4 × 24.0 × 9.1 cm |
| Net Weight | Approx. 3.3 kg / 7.28 lb |
| Operating Temperature | 14°F to 122°F / -10°C to 50°C |
| Storage Temperature | -15°C to 60°C |
| Humidity | 5% to 95% RH, non-condensing |
| Installation | Wall-mounted |
| Compliance | CE |
Inverter Output
| Rated Output Power | 1000W / 1000VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 230V AC ±5% |
| Output Frequency | 50Hz |
| Surge Capacity | 2000W for up to 1 second |
| Peak Inverter Efficiency | 94% |
| No-Load Power Consumption | Less than 28W |
| Overload Protection | 3 seconds at ≥150% load / 5 seconds at 101%–150% load |
| Output Short-Circuit Protection | Circuit breaker |
Solar Input
| Maximum PV Array Power | 600W |
| Solar Charger Type | MPPT |
| MPPT Voltage Range | 20–150V DC |
| Maximum PV Open-Circuit Voltage | 150V DC |
| Maximum Solar Charging Current | 40A |
Battery & Charging
| Nominal Battery Voltage | 12V DC |
| Maximum AC Charging Current | 40A |
| Maximum Solar + AC Charging Current | 80A |
| Charging Algorithm | 3-Stage Charging |
| Default Bulk Charging Voltage | 14.1V |
| Default Float Charging Voltage | 13.5V |
| Low DC Cut-Off Voltage | 10.75V at load below 50% / 10.5V at load of 50% or above |
| High DC Cut-Off Voltage | 16.0V |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Maximum AC Input Voltage | 300V AC |
| Transfer Time | 10ms |
| Supported Power Sources | Solar, Battery, Utility and Generator |
| Output Source Priorities | Utility First / Solar First / SBU Priority / MKS Priority |
| Charging Source Priorities | Solar First / Solar and Utility / Solar Only |
Display & Protection
| Display | LCD display with function buttons |
| AC Output Connection | Hardwired AC output and built-in output receptacles |
| Anti-Dust Kit | Optional removable anti-dust filter |
| Automatic Restart After Overload | Configurable |
| Automatic Restart After Over-Temperature | Configurable |
| Over-Temperature Protection | Supported |
| Short-Circuit Protection | Supported |
| High and Low Voltage Protection | Supported |
| Fault and Warning Display | LCD fault codes with audible alarm |
Product specifications are based on the latest available technical documentation. Installation must be completed by qualified personnel in accordance with local electrical and safety regulations.