Kit Cumhachta Humsienk 12V RV & Lasmuigh den Eangach - Ceallraí LiFePO4 2.56kWh le Inverter 1000W
Trealamh cumhachta dlúth 12V 2.56kWh le Ceallraí 12V 200Ah Plus LiFePO4 agus Inbhéirteoir tonn sine íon 1000W. Tógtha le haghaidh RVanna, báid, campála, cábáin, agus bunriachtanais chúltaca, cabhraíonn sé leat gléasanna ísealchumhachta laethúla a chumhachtú agus muirearú gréine á thacú aige le húsáid lasmuigh den ghreille ag an am céanna.
- Trealamh Cumhachta 12V 2.56kWh — Áirítear ceallraí 12V 200Ah Plus LiFePO4 agus inbhéirtóir tonn sine íon 1000W.
- Cobhsaí Aschur AC 1000W — Soláthraíonn an t-inbhéirtóir cumhacht tonn sine íon 230V AC do ghléasanna ísealchumhachta laethúla.
- Muirearú Gréine MPPT 600W — Tacaíonn an t-inbhéirtóir le hionchur PV suas le 600W le raon MPPT 20–150VDC.
- Ceallraí 12V 200Ah Plus — ceallraí LiFePO4 2560Wh le 250A uasmhéid sruth urscaoilte leanúnach agus IP65 cosaint.
- Roghanna Muirir Solúbtha— Tacaíonn sé le muirearú gréine, muirearú AC, agus muirearú AC + gréine comhcheangailte suas le 80A.
- Do Riachtanais Bheaga Cumhachta Lasmuigh den Ghreille — Oiriúnach do RVanna, báid, córais fuinnimh gréine, stóráil tí agus úsáid lasmuigh den ghreille.
- Cosaint Ceallraí Deimhnithe — Comhlíonann an ceallraí na caighdeáin CE, RoHS, UN38.3, agus ECE R10 caighdeáin.
- Barántas Ceallraí 5 Bliana — Cláraigh do cheallraí Humsienk le haghaidh Barántas 5 bliana tacaíocht.
What Can It Power?
Estimate how long the 12V 200Ah Plus battery can run your device with the 1000W pure sine wave inverter.
Estimated runtime only. Actual results may vary by load, startup power, battery condition and environment.
What’s Included & User Manuals
Check what comes with the 12V 200Ah Plus battery and 12V 1000W inverter, and download the user manuals before installation.
12V 200Ah Plus Battery Package
Based on the battery user manual packing list.
- Battery × 1
- Screw × 4
- Specification × 1
- Plastic Insulation Cap × 2
12V 1000W Inverter Package
Based on the inverter user manual unpacking list.
- The Unit × 1
- User Manual × 1
- U-Terminal × 2
Package contents are listed according to the product user manuals. Cables and additional installation accessories are not included unless otherwise stated.
Specifications
12V 200Ah Plus Battery
| Battery Model | 12V 200Ah 250A Plus LiFePO4 Battery |
| Nominal Voltage | 12.8V |
| Capacity | 200Ah |
| Energy | 2,560Wh |
| Standard / Maximum Continuous Charging | 40A / 250A |
| Max Continuous Discharge Current | 250A |
| Recommended Charging Voltage | 14.6V ±0.2V LiFePO4 charger |
| Cycle Life | 6000 cycles @80% DOD |
| Self-Discharge Rate | ≤3% per month |
| Series & Parallel Connection | Max. 4 series / 4 parallel |
| Dimensions | 20.53 × 9.37 × 8.69 in / 52.1 × 23.8 × 22.1 cm |
| Weight | 58.2 lb ±3% / 26.4 kg ±3% |
| Protection Rating | IP65 |
| Case Material | ABS+PC / UL94-V0 |
| Terminal Bolt Size | M8 |
| Battery Pack Certifications | ECE R10 / IEC62133 / RoHS / CE / FCC / UN38.3 / Class 9 |
| Cell Certifications | UL1642 / UL2580 / UN38.3 |
12V 1000W Inverter Output
| Inverter Model | 1.0KW-12V |
| Rated Output Power | 1000W / 1000VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 230V AC ±5% |
| Output Frequency | 50Hz |
| Surge Capacity | 2× rated power for 1 second |
| Peak Inverter Efficiency | 94% |
| No-Load Power Consumption | <28W |
| Nominal DC Input Voltage | 12V DC |
| Low DC Cut-Off Voltage | 10.75V at load below 50% / 10.5V at load of 50% or above |
| High DC Cut-Off Voltage | 16.0V |
Solar & Charging
| Charging Algorithm | 3-Stage Charging |
| Maximum AC Charging Current | 40A |
| Bulk Charging Voltage | 14.6V for flooded battery / 14.1V for AGM or gel battery |
| Floating Charging Voltage | 13.5V DC |
| Solar Charger Type | MPPT |
| Maximum PV Array Power | 600W |
| MPPT Voltage Range | 20–150V DC |
| Maximum PV Open-Circuit Voltage | 150V DC |
| Maximum Solar Charging Current | 40A |
| Maximum AC + Solar Charging Current | 80A |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Input Voltage Waveform | Sinusoidal, utility or generator |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Maximum AC Input Voltage | 300V AC |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Transfer Time | 10ms |
| Output Source Priorities | Utility First / Solar First / SBU Priority / MKS Priority |
| Charging Source Priorities | Solar First / Solar and Utility / Solar Only |
General & Protection
| Safety Certification | CE |
| Inverter Dimensions | 284 × 240 × 91 mm / 28.4 × 24.0 × 9.1 cm |
| Inverter Net Weight | 3.3 kg / 7.28 lb |
| Operating Temperature Range | -10°C to 50°C |
| Storage Temperature | -15°C to 60°C |
| Humidity | 5% to 95% relative humidity, non-condensing |
| Display | LCD display with function buttons |
| Output Short-Circuit Protection | Circuit breaker |
| Overload Protection | 3 seconds at ≥150% load / 5 seconds at 101%–150% load |
| Automatic Restart After Overload | Configurable |
| Automatic Restart After Over-Temperature | Configurable |
Specifications are based on the product user manuals. ECE R10 certification applies to the 12V 200Ah Plus battery. Runtime and output performance may vary depending on appliance power, startup load, wiring, battery condition and installation environment.