Inverter Pure Sine Wave Inverter Humsienk PULSAR 12V 1000W
Tógtha le haghaidh campálaithe, báid agus socruithe beaga lasmuigh den ghreille, seachadann an t-inverter tonn sine íon 12V 1000W seo cumhacht chobhsaí do chuisneoirí, soilsiú, ríomhairí glúine agus leictreonaic laethúil. Tacaíonn a rialtóir MPPT ionsuite le... suas go dtí 600W de phainéil ghréine, agus coinníonn muirearú fóntais agus gréine do cheallraí réidh.
- Aschur Tonn Sín Íon 1000W: Seachadann sé cumhacht AC 230V cobhsaí do chuisneoirí, soilsiú, ríomhairí glúine agus leictreonaic íogair i gcampálaithe, i mbáid agus i gcórais bheaga lasmuigh den ghreille.
- Cumhacht Eagar PV suas le 600W: Tacaíonn sé le suas le 600W de phainéil ghréine ceangailte le haghaidh bailiú fuinnimh éifeachtach i rith an lae.
- Muirearú Gréine 40A MPPT: Soláthraíonn an rialtóir MPPT ionsuite suas le 40A de mhuirearú gréine do chórais cadhnraí 12V comhoiriúnacha.
- 80A Sruth Muirir Iomlán: Tacaíonn sé le muirearú gréine agus fóntais chomhcheangailte suas le 80A chun cabhrú leis an gceallraí a athluchtú níos tapúla.
- Cumas Borrtha 2000W: Seachadann sé dhá oiread na cumhachta aschuir rátáilte ar feadh suas le soicind amháin chun déileáil le hualaí tosaithe gearra fearas.
- Tosaíocht Cumhachta Solúbtha: Roghnaigh tosaíocht fóntais ar dtús, gréine ar dtús nó SBU chun freastal ar riachtanais chumhachta éagsúla lasmuigh den ghreille agus cúltaca.
- Dearadh Dlúth Lasmuigh den Ghreille: Sábhálann an dearadh balla-fheistithe éadrom 3.3kg spás i gcampálaithe, i mbáid, i gcábáin agus i gcórais chumhachta beaga.
Choose Your 12V Battery Setup
Pair your 12V 1000W inverter with the right 12V LiFePO4 battery for RVs, boats, camping, small appliances, and backup power.
| Power Scenario | Typical Devices | Power Demand | Recommended Battery Setup | Battery Capacity |
|---|---|---|---|---|
| Essential 12V Backup Basic backup use | Lights / Wi-Fi / Phone Charging / Small Fan / TV | Light Load For daily essentials and small devices | 1.92 kWh | |
| Extended Runtime Setup RV & camping power | Fridge / Freezer / TV / Laptop / Coffee Maker / Small Pump | Medium Load Longer backup time with more capacity | 2.56 kWh | |
| Maximum Runtime Large-capacity 12V backup | RV / Boat / Off-grid Cabin / Longer Backup Use / Multiple Appliances | Heavy Runtime Large 12V battery capacity for longer use | 4.10 kWh |
💡 Tip: This is a 12V inverter. Use a 12V battery system only. Do not connect batteries in series, as series connection increases the voltage to 24V or higher. For longer runtime, choose a larger 12V battery or connect identical 12V batteries in parallel only if supported by the battery manual.
Estimate Your 12V Backup Time
Choose a common load or enter your own power usage to estimate how long each 12V battery setup can keep your inverter running.
Choose Your Power Load
Not sure? Start with one of the common 12V inverter load presets below.
Estimated runtime = nominal battery energy × 94% peak inverter efficiency ÷ power load.
Essential 12V Backup
Compact backup capacity for lights, Wi-Fi, phone charging, small fans, TV, and daily essentials.
Extended Runtime Setup
More capacity for RVs, boats, camping, refrigerators, laptops, and longer daily use.
Maximum Runtime
High-capacity 12V backup for longer RV, marine, cabin, and off-grid use.
Estimated runtime is for reference only and is calculated using nominal battery energy and the inverter's 94% peak efficiency. Actual runtime may vary depending on battery condition, battery settings, appliance load, operating temperature, wiring, and overall system efficiency. This is a 12V inverter. Use a 12V battery system only. Do not connect batteries in series, as series connection increases the voltage to 24V or higher.
Specification
General
| Model | HSINV12V1KW220-SRA-EU |
| Dimensions (D × W × H) | 284 × 240 × 91 mm / 28.4 × 24.0 × 9.1 cm |
| Net Weight | Approx. 3.3 kg / 7.28 lb |
| Operating Temperature | 14°F to 122°F / -10°C to 50°C |
| Storage Temperature | -15°C to 60°C |
| Humidity | 5% to 95% RH, non-condensing |
| Installation | Wall-mounted |
| Compliance | CE |
Inverter Output
| Rated Output Power | 1000W / 1000VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 230V AC ±5% |
| Output Frequency | 50Hz |
| Surge Capacity | 2000W for up to 1 second |
| Peak Inverter Efficiency | 94% |
| No-Load Power Consumption | Less than 28W |
| Overload Protection | 3 seconds at ≥150% load / 5 seconds at 101%–150% load |
| Output Short-Circuit Protection | Circuit breaker |
Solar Input
| Maximum PV Array Power | 600W |
| Solar Charger Type | MPPT |
| MPPT Voltage Range | 20–150V DC |
| Maximum PV Open-Circuit Voltage | 150V DC |
| Maximum Solar Charging Current | 40A |
Battery & Charging
| Nominal Battery Voltage | 12V DC |
| Maximum AC Charging Current | 40A |
| Maximum Solar + AC Charging Current | 80A |
| Charging Algorithm | 3-Stage Charging |
| Default Bulk Charging Voltage | 14.1V |
| Default Float Charging Voltage | 13.5V |
| Low DC Cut-Off Voltage | 10.75V at load below 50% / 10.5V at load of 50% or above |
| High DC Cut-Off Voltage | 16.0V |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Maximum AC Input Voltage | 300V AC |
| Transfer Time | 10ms |
| Supported Power Sources | Solar, Battery, Utility and Generator |
| Output Source Priorities | Utility First / Solar First / SBU Priority / MKS Priority |
| Charging Source Priorities | Solar First / Solar and Utility / Solar Only |
Display & Protection
| Display | LCD display with function buttons |
| AC Output Connection | Hardwired AC output and built-in output receptacles |
| Anti-Dust Kit | Optional removable anti-dust filter |
| Automatic Restart After Overload | Configurable |
| Automatic Restart After Over-Temperature | Configurable |
| Over-Temperature Protection | Supported |
| Short-Circuit Protection | Supported |
| High and Low Voltage Protection | Supported |
| Fault and Warning Display | LCD fault codes with audible alarm |
Product specifications are based on the latest available technical documentation. Installation must be completed by qualified personnel in accordance with local electrical and safety regulations.