Μετατροπέας καθαρού ημιτονοειδούς κύματος Humsienk PULSAR 48V 6200W
Ο αυτόματος ηλιακός μετατροπέας Humsienk 48V 6,2kW All-in-One, εξαλείφει τις καθυστερήσεις φόρτισης και μεγιστοποιεί τη συλλογή ενέργειας με τεράστια... Ισχύς εισόδου φωτοβολταϊκού συστήματος 6500W και 93% μέγιστη απόδοση μετατροπής. Διαθέτει ένα τρομερό Ικανότητα υπέρτασης 12800W και Πραγματική καθαρή ημιτονοειδής έξοδος, Αυτός ο υβριδικός φορτιστής μετατροπέα ενεργοποιεί αβίαστα συσκευές βαρέως τύπου, διασφαλίζοντας παράλληλα ομαλή και αθόρυβη λειτουργία για ευαίσθητα ηλεκτρονικά. Κατασκευασμένος με προηγμένη τεχνολογία υψηλής συχνότητας (HF) σε ένα ελαφρύ πλαίσιο 8,9 kg, παρέχει έξυπνη προστασία ασφαλείας έξι σταδίων και λειτουργεί αξιόπιστα σε ακραίες θερμοκρασίες που κυμαίνονται από -10°C έως 50°C. Επιλέξτε αυτό το ευέλικτο σύστημα μετατροπέα DC σε AC για απρόσκοπτη εναλλαγή μεταξύ αυτόνομης ηλιακής ενέργειας και ηλεκτρικής ενέργειας από το δίκτυο, δίνοντάς σας τον απόλυτο έλεγχο της ενεργειακής ανεξαρτησίας του σπιτιού σας.
- Έξοδος καθαρού ημιτονοειδούς κύματος 6200W: Σταθερή τροφοδοσία 220V, 230V ή 240V AC για οικιακές συσκευές, εργαλεία και ευαίσθητα ηλεκτρονικά.
- Έως 8000W ηλιακή ισχύς εισόδου: Υποστηρίζει μια μεγάλη φωτοβολταϊκή συστοιχία για ταχύτερη συλλογή ενέργειας και βελτιωμένη απόδοση του ηλιακού συστήματος.
- Γρήγορη φόρτιση 120A: Παρέχει συνολικό ρεύμα φόρτισης έως και 120A για συμβατά συστήματα μπαταριών 48V.
- Ισχύς κύματος 12400W: Αντιμετωπίζει σύντομες υπερτάσεις εκκίνησης από αντλίες, ψυγεία και άλλες συσκευές που λειτουργούν με κινητήρα.
- Έξοδοι διπλού φορτίου: Διαχωρίζει τα βασικά από τα δευτερεύοντα φορτία για πιο έξυπνη διαχείριση μπαταρίας και ενέργειας.
- Ευέλικτες πηγές ενέργειας: Λειτουργεί με ηλιακή ενέργεια, μπαταρίες, ηλεκτρική ενέργεια κοινής ωφέλειας και γεννήτριες για συστήματα εφεδρικής και ηλιακής ενέργειας.
- Έξυπνη παρακολούθηση συστήματος: Υποστηρίζει επικοινωνία μέσω μπαταρίας λιθίου RS485 και προαιρετική παρακολούθηση μέσω εφαρμογής Wi-Fi.
Choose Your Backup Scenario
Select the right battery bundle based on your home backup needs.
| Backup Scenario | Typical Devices | Power Demand | Recommended Bundle | Battery Capacity |
|---|---|---|---|---|
| Essential Backup Short outages | Lights / Wi-Fi / Fridge / TV | Light Load Basic home backup | 5.12 kWh | |
| Daily Home Backup Longer outages | Fridge / Freezer / Office / Pump / Small Appliances | Medium Load Daily home use | 16.08 kWh | |
| Maximum Runtime Heavy backup | Large Home / Water Pump / Power Tools / Off-grid | Heavy Load Long backup time | 20.48 kWh |
💡 Tip: Click any recommended battery bundle above to view the matching option.
Estimate Your Backup Time
Choose a common home load or enter your own power usage to estimate how long each 48V battery can keep your system running.
Choose Your Power Load
Not sure? Start with one of the common home-use presets below.
Estimated runtime = battery capacity × 90% usable energy ÷ power load.
100Ah Rack Battery
5.12kWh · Rack-mounted starter backup
100Ah Wall-Mounted Battery
5.12kWh · Clean wall-mounted setup
314Ah Wall-Mounted Battery
16.08kWh · Whole-home essentials
400Ah Wall-Mounted Battery
20.48kWh · Maximum runtime
Estimated runtime is for reference only. Actual performance may vary depending on appliance power, inverter efficiency, battery settings, temperature, and installation conditions.
Specification
General
| Model | HSINV48V6K2W220-SRC-EU |
| Phase | Single Phase |
| Dimensions (L × W × H) | 14.09 × 4.57 × 17.40 in / 358 × 116 × 442 mm |
| Net Weight | Approx. 8.9 kg / 19.62 lb |
| Operating Temperature | 14°F to 122°F / -10°C to 50°C |
| Humidity | 5% to 95% RH, non-condensing |
| Installation | Wall-mounted |
| Compliance | CE |
Inverter Output
| Rated Output Power | 6200W / 6200VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 220V / 230V / 240V AC |
| Output Frequency | 50Hz |
| Surge Capacity | 12400W for up to 5 seconds |
| Peak Inverter Efficiency | 93% |
| No-Load Power Consumption | 50W |
| Main Load Output | Up to 6200W |
| Secondary Load Output | Up to 2067W in battery mode |
Solar Input
| Maximum PV Array Power | 8000W |
| MPPT Voltage Range | 60–450V DC |
| Maximum PV Open-Circuit Voltage | 500V DC |
| Nominal PV Voltage | 360V DC |
| Maximum PV Input Current | 22A |
| Maximum Solar Charging Current | 120A |
Battery & Charging
| Nominal Battery Voltage | 48V DC |
| Maximum AC Charging Current | 100A |
| Maximum Solar + AC Charging Current | 120A |
| Charging Algorithm | 3-Stage Charging |
| Lithium Battery Communication | RS485 |
| Supported Battery Protocols | PYLON / PACE |
| Battery-Free Operation | Supported under compatible input conditions |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Maximum AC Input Current | 40A |
| Transfer Time | 10ms typical in UPS Mode / 20ms typical in Appliance Mode |
| Supported Power Sources | Solar, Battery, Utility and Generator |
| Operating Modes | On-Grid and Off-Grid |
| Dual Load Output | Main and secondary output control |
Communication & Protection
| Communication Ports | RS232 / RS485 |
| Wireless Monitoring | Optional Wi-Fi / GPRS module |
| Display | LCD display with function buttons |
| Load Outputs | Dual Output |
| Dust Protection | Built-in removable anti-dust kit |
| Overload Protection | Supported |
| Short-Circuit Protection | Supported |
| Over-Temperature Protection | Supported |
| Voltage Protection | High and low input/output voltage protection |
Product specifications are based on the latest technical documentation. Installation and grid connection must be completed in accordance with local regulations by qualified personnel.