Kit di alimentazione off-grid per camper & Humsienk da 12 V — Batteria LiFePO4 da 2,56 kWh con inverter da 1.000 W
Un kit di alimentazione compatto da 2,56 kWh 12 V con un Batteria LiFePO4 da 12V 200Ah Plus E Inverter a onda sinusoidale pura da 1000 W. Progettato per camper, barche, campeggio, baite e come sistema di backup essenziale, ti aiuta ad alimentare i dispositivi a basso consumo di uso quotidiano, supportando al contempo la ricarica solare per l'utilizzo fuori rete.
- Kit di alimentazione da 2,56 kWh a 12 V — Include una batteria LiFePO4 da 12 V 200 Ah Plus e un inverter a onda sinusoidale pura da 1000 W.
- Stabile Uscita CA da 1000 W — L'inverter fornisce corrente alternata a onda sinusoidale pura da 230 V per i dispositivi a basso consumo di uso quotidiano.
- Ricarica solare MPPT da 600 W — L'inverter supporta un ingresso fotovoltaico fino a 600 W con un intervallo MPPT di 20–150 V CC.
- Batteria 12V 200Ah Plus — Batteria LiFePO4 da 2560Wh con 250A max corrente di scarica continua e IP65 protezione.
- Opzioni di ricarica flessibili: supporta la ricarica solare, la ricarica CA e la ricarica combinata CA + solare fino a 80 A.
- Per piccole esigenze di alimentazione fuori rete: adatto a camper, barche, impianti solari, sistemi di accumulo domestico e utilizzo off-grid.
- Protezione della batteria certificata: la batteria soddisfa CE, RoHS, UN38.3 e ECE R10 standard.
- Garanzia di 5 anni sulla batteria: registra la tua batteria Humsienk per Garanzia di 5 anni supporto.
What Can It Power?
Estimate how long the 12V 200Ah Plus battery can run your device with the 1000W pure sine wave inverter.
Estimated runtime only. Actual results may vary by load, startup power, battery condition and environment.
What’s Included & User Manuals
Check what comes with the 12V 200Ah Plus battery and 12V 1000W inverter, and download the user manuals before installation.
12V 200Ah Plus Battery Package
Based on the battery user manual packing list.
- Battery × 1
- Screw × 4
- Specification × 1
- Plastic Insulation Cap × 2
12V 1000W Inverter Package
Based on the inverter user manual unpacking list.
- The Unit × 1
- User Manual × 1
- U-Terminal × 2
Package contents are listed according to the product user manuals. Cables and additional installation accessories are not included unless otherwise stated.
Specifications
12V 200Ah Plus Battery
| Battery Model | 12V 200Ah 250A Plus LiFePO4 Battery |
| Nominal Voltage | 12.8V |
| Capacity | 200Ah |
| Energy | 2,560Wh |
| Standard / Maximum Continuous Charging | 40A / 250A |
| Max Continuous Discharge Current | 250A |
| Recommended Charging Voltage | 14.6V ±0.2V LiFePO4 charger |
| Cycle Life | 6000 cycles @80% DOD |
| Self-Discharge Rate | ≤3% per month |
| Series & Parallel Connection | Max. 4 series / 4 parallel |
| Dimensions | 20.53 × 9.37 × 8.69 in / 52.1 × 23.8 × 22.1 cm |
| Weight | 58.2 lb ±3% / 26.4 kg ±3% |
| Protection Rating | IP65 |
| Case Material | ABS+PC / UL94-V0 |
| Terminal Bolt Size | M8 |
| Battery Pack Certifications | ECE R10 / IEC62133 / RoHS / CE / FCC / UN38.3 / Class 9 |
| Cell Certifications | UL1642 / UL2580 / UN38.3 |
12V 1000W Inverter Output
| Inverter Model | 1.0KW-12V |
| Rated Output Power | 1000W / 1000VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 230V AC ±5% |
| Output Frequency | 50Hz |
| Surge Capacity | 2× rated power for 1 second |
| Peak Inverter Efficiency | 94% |
| No-Load Power Consumption | <28W |
| Nominal DC Input Voltage | 12V DC |
| Low DC Cut-Off Voltage | 10.75V at load below 50% / 10.5V at load of 50% or above |
| High DC Cut-Off Voltage | 16.0V |
Solar & Charging
| Charging Algorithm | 3-Stage Charging |
| Maximum AC Charging Current | 40A |
| Bulk Charging Voltage | 14.6V for flooded battery / 14.1V for AGM or gel battery |
| Floating Charging Voltage | 13.5V DC |
| Solar Charger Type | MPPT |
| Maximum PV Array Power | 600W |
| MPPT Voltage Range | 20–150V DC |
| Maximum PV Open-Circuit Voltage | 150V DC |
| Maximum Solar Charging Current | 40A |
| Maximum AC + Solar Charging Current | 80A |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Input Voltage Waveform | Sinusoidal, utility or generator |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Maximum AC Input Voltage | 300V AC |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Transfer Time | 10ms |
| Output Source Priorities | Utility First / Solar First / SBU Priority / MKS Priority |
| Charging Source Priorities | Solar First / Solar and Utility / Solar Only |
General & Protection
| Safety Certification | CE |
| Inverter Dimensions | 284 × 240 × 91 mm / 28.4 × 24.0 × 9.1 cm |
| Inverter Net Weight | 3.3 kg / 7.28 lb |
| Operating Temperature Range | -10°C to 50°C |
| Storage Temperature | -15°C to 60°C |
| Humidity | 5% to 95% relative humidity, non-condensing |
| Display | LCD display with function buttons |
| Output Short-Circuit Protection | Circuit breaker |
| Overload Protection | 3 seconds at ≥150% load / 5 seconds at 101%–150% load |
| Automatic Restart After Overload | Configurable |
| Automatic Restart After Over-Temperature | Configurable |
Specifications are based on the product user manuals. ECE R10 certification applies to the 12V 200Ah Plus battery. Runtime and output performance may vary depending on appliance power, startup load, wiring, battery condition and installation environment.