Humsienk PULSAR 48V 6200W Pure Sine Wave Inverter
Håll ditt hem igång under avbrott med stabil 6200W ren sinusvågsutgång för vardagliga apparater och viktiga belastningar. Växelriktaren stöder upp till 8000 W PV-paneleffekt, fram till 120A total laddningsström, och flexibel ströminmatning från solceller, batterier, elnät eller en generator, vilket gör den lämplig för reservkraft i hemmet och för energisystem utanför elnätet.
- 6200W ren sinusvågseffekt: Stabil 220V, 230V eller 240V växelström för hushållsapparater och känslig elektronik.
- Upp till 8000W PV-paneleffekt: Stöder en stor solpanel för hög solenergitillförsel.
- 120A total laddningsström: Stöder upp till 120A laddning för kompatibla 48V-batterisystem.
- 12400W överspänningseffekt: Ger upp till dubbelt så hög nominell effekt i upp till 5 sekunder för att stödja startbelastningar.
- Dubbla belastningsutgångar: Stöder separata huvud- och sekundärutgångar, där sekundärutgången kan konfigureras från 1240 W till 4340 W.
- Flexibla strömkällor: Stöder sol-, batteri-, el- och generatorström för reserv- och off-grid-applikationer.
-
Smart kommunikation & Övervakning: Stöder RS485-kommunikation. Wi-Fi/GPRS-övervakning (tillval) kräver en extra modul.
Choose Your Backup Scenario
Select the right battery bundle based on your home backup needs.
| Backup Scenario | Typical Devices | Power Demand | Recommended Bundle | Battery Capacity |
|---|---|---|---|---|
| Essential Backup Short outages | Lights / Wi-Fi / Fridge / TV | Light Load Basic home backup | 5.12 kWh | |
| Daily Home Backup Longer outages | Fridge / Freezer / Office / Pump / Small Appliances | Medium Load Daily home use | 16.08 kWh | |
| Maximum Runtime Heavy backup | Large Home / Water Pump / Power Tools / Off-grid | Heavy Load Long backup time | 20.48 kWh |
💡 Tip: Click any recommended battery bundle above to view the matching option.
Estimate Your Backup Time
Choose a common home load or enter your own power usage to estimate how long each 48V battery can keep your system running.
Choose Your Power Load
Not sure? Start with one of the common home-use presets below.
Estimated runtime = battery capacity × 90% usable energy ÷ power load.
100Ah Rack Battery
5.12kWh · Rack-mounted starter backup
100Ah Wall-Mounted Battery
5.12kWh · Clean wall-mounted setup
314Ah Wall-Mounted Battery
16.08kWh · Whole-home essentials
400Ah Wall-Mounted Battery
20.48kWh · Maximum runtime
Estimated runtime is for reference only. Actual performance may vary depending on appliance power, inverter efficiency, battery settings, temperature, and installation conditions.
Specification
General
| Model | HSINV48V6K2W220-SRC-EU |
| Phase | Single Phase |
| Dimensions (L × W × H) | 14.09 × 4.57 × 17.40 in / 358 × 116 × 442 mm |
| Net Weight | Approx. 8.9 kg / 19.62 lb |
| Operating Temperature | 14°F to 122°F / -10°C to 50°C |
| Humidity | 5% to 95% RH, non-condensing |
| Installation | Wall-mounted |
| Compliance | CE |
Inverter Output
| Rated Output Power | 6200W / 6200VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 220V / 230V / 240V AC |
| Output Frequency | 50Hz |
| Surge Capacity | 12400W for up to 5 seconds |
| Peak Inverter Efficiency | 93% |
| No-Load Power Consumption | 50W |
| Main Load Output | Up to 6200W |
| Secondary Load Output | 1240W–4340W configurable range |
Solar Input
| Maximum PV Array Power | 8000W |
| MPPT Voltage Range | 60–450V DC |
| Maximum PV Open-Circuit Voltage | 500V DC |
| Nominal PV Voltage | 360V DC |
| Maximum Solar Charging Current | 120A |
Battery & Charging
| Nominal Battery Voltage | 48V DC |
| Maximum AC Charging Current | 100A |
| Maximum Solar + AC Charging Current | 120A |
| Charging Algorithm | 3-Stage Charging |
| Lithium Battery Communication | RS485 |
| Supported Battery Protocols | PYLON / PACE |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Recommended AC Breaker | 50A |
| Transfer Time | 10ms typical in UPS Mode / 20ms typical in Appliance Mode |
| Supported Power Sources | Solar, Battery, Utility and Generator |
| Operating Modes | On-Grid and Off-Grid |
| Dual Load Output | Main and secondary output control |
Communication & Protection
| Communication Ports | RS232 / RS485 |
| Wireless Monitoring | Optional Wi-Fi / GPRS module |
| Display | LCD display with function buttons |
| Load Outputs | Dual Output |
| Dust Protection | Built-in removable anti-dust kit |
| Overload Protection | Supported |
| Short-Circuit Protection | Supported |
| Over-Temperature Protection | Supported |
| Voltage Protection | High and low input/output voltage protection |
Product specifications are based on the latest technical documentation. Installation and grid connection must be completed in accordance with local regulations by qualified personnel.