Humsienk PULSAR 48V 6200W Pure Sine Wave Inverter
Keep your home running during outages and power everyday appliances, tools and essential loads with stable 6200W pure sine wave output. The system supports up to 8000W of solar input, fast 120A charging and flexible power from solar, batteries, utility or a generator, making it suitable for home backup and off-grid energy use.
- 6200W Pure Sine Wave Output: Stable 220V, 230V or 240V AC power for household appliances, tools and sensitive electronics.
- Up to 8000W Solar Input: Supports a large PV array for faster energy collection and improved solar system performance.
- 120A Fast Charging: Provides up to 120A total charging current for compatible 48V battery systems.
- 12400W Surge Power: Handles short startup surges from pumps, refrigerators and other motor-driven appliances.
- Dual Load Outputs: Separates essential and secondary loads for smarter battery and power management.
- Flexible Power Sources: Works with solar, batteries, utility power and generators for backup and solar energy systems.
- Smart System Monitoring: Supports RS485 lithium battery communication and optional Wi-Fi app monitoring.
Choose Your Backup Scenario
Select the right battery bundle based on your home backup needs.
| Backup Scenario | Typical Devices | Power Demand | Recommended Bundle | Battery Capacity |
|---|---|---|---|---|
| Essential Backup Short outages | Lights / Wi-Fi / Fridge / TV | Light Load Basic home backup | 5.12 kWh | |
| Daily Home Backup Longer outages | Fridge / Freezer / Office / Pump / Small Appliances | Medium Load Daily home use | 16.08 kWh | |
| Maximum Runtime Heavy backup | Large Home / Water Pump / Power Tools / Off-grid | Heavy Load Long backup time | 20.48 kWh |
💡 Tip: Click any recommended battery bundle above to view the matching option.
Estimate Your Backup Time
Choose a common home load or enter your own power usage to estimate how long each 48V battery can keep your system running.
Choose Your Power Load
Not sure? Start with one of the common home-use presets below.
Estimated runtime = battery capacity × 90% usable energy ÷ power load.
100Ah Rack Battery
5.12kWh · Rack-mounted starter backup
100Ah Wall-Mounted Battery
5.12kWh · Clean wall-mounted setup
314Ah Wall-Mounted Battery
16.08kWh · Whole-home essentials
400Ah Wall-Mounted Battery
20.48kWh · Maximum runtime
Estimated runtime is for reference only. Actual performance may vary depending on appliance power, inverter efficiency, battery settings, temperature, and installation conditions.
Specification
General
| Model | HSINV48V6K2W220-SRC-EU |
| Phase | Single Phase |
| Dimensions (L × W × H) | 14.09 × 4.57 × 17.40 in / 358 × 116 × 442 mm |
| Net Weight | Approx. 8.9 kg / 19.62 lb |
| Operating Temperature | 14°F to 122°F / -10°C to 50°C |
| Humidity | 5% to 95% RH, non-condensing |
| Installation | Wall-mounted |
| Compliance | CE |
Inverter Output
| Rated Output Power | 6200W / 6200VA |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 220V / 230V / 240V AC |
| Output Frequency | 50Hz |
| Surge Capacity | 12400W for up to 5 seconds |
| Peak Inverter Efficiency | 93% |
| No-Load Power Consumption | 50W |
| Main Load Output | Up to 6200W |
| Secondary Load Output | Up to 2067W in battery mode |
Solar Input
| Maximum PV Array Power | 8000W |
| MPPT Voltage Range | 60–450V DC |
| Maximum PV Open-Circuit Voltage | 500V DC |
| Nominal PV Voltage | 360V DC |
| Maximum PV Input Current | 22A |
| Maximum Solar Charging Current | 120A |
Battery & Charging
| Nominal Battery Voltage | 48V DC |
| Maximum AC Charging Current | 100A |
| Maximum Solar + AC Charging Current | 120A |
| Charging Algorithm | 3-Stage Charging |
| Lithium Battery Communication | RS485 |
| Supported Battery Protocols | PYLON / PACE |
| Battery-Free Operation | Supported under compatible input conditions |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Maximum AC Input Current | 40A |
| Transfer Time | 10ms typical in UPS Mode / 20ms typical in Appliance Mode |
| Supported Power Sources | Solar, Battery, Utility and Generator |
| Operating Modes | On-Grid and Off-Grid |
| Dual Load Output | Main and secondary output control |
Communication & Protection
| Communication Ports | RS232 / RS485 |
| Wireless Monitoring | Optional Wi-Fi / GPRS module |
| Display | LCD display with function buttons |
| Load Outputs | Dual Output |
| Dust Protection | Built-in removable anti-dust kit |
| Overload Protection | Supported |
| Short-Circuit Protection | Supported |
| Over-Temperature Protection | Supported |
| Voltage Protection | High and low input/output voltage protection |
Product specifications are based on the latest technical documentation. Installation and grid connection must be completed in accordance with local regulations by qualified personnel.