Humsienk 24 V hálózaton kívüli tápkészlet – 5,12 kWh LiFePO4 akkumulátor 4200 W-os tiszta szinuszos inverterrel
Több energia, hosszabb ideig hálózatról leválva! Egy erőteljes 5,12 kWh 24 V-os akkumulátoros inverter készlet kabinokhoz, lakókocsikhoz, hálózaton kívüli napelemes rendszerekhez és tartalék áramellátáshoz. Párosítja a 24 V-os 200 Ah-s plusz LiFePO4 akkumulátor egy 4200 W-os tiszta szinuszhullámú inverter és egészen 6200 W-os fotovoltaikus bemenet, nagyobb kapacitást, erősebb teljesítményt és rugalmas napelemes töltést biztosít a mindennapi használatra alkalmas készülékekhez.
- 5,12 kWh-s tápegység — 24 V-os 200 Ah-s LiFePO4 akkumulátor 4200 W-os inverterrel.
- 4200 W-os tiszta szinuszhullám — Stabil tápellátás akár 8400 W-os túlfeszültséggel.
- 250A épületfelügyeleti rendszer — Akár 6400 W-os nagy teljesítményű terheléseket is támogat.
- 6200 W napelemes teljesítmény — Nagyobb, hálózaton kívüli napelemes rendszerekhez készült.
- Akár 120 A-es töltés — Gyors töltés napelemről, közműről vagy generátorról.
What Can It Power?
Estimate how long the 24V 200Ah Plus battery can run your device with the 4200W pure sine wave inverter.
Estimated runtime only. Results are based on manual backup-time data where available; actual use may vary by load, startup power, battery condition and environment.
What’s Included & User Manuals
Check what comes with the 24V 200Ah Plus battery and 24V 4200W inverter, and download the user manuals before installation.
24V 200Ah Plus Battery Package
Please check the actual package contents after delivery.
- 24V 200Ah Plus LiFePO4 Battery × 1
- Additional battery accessories See actual package
24V 4200W Inverter Package
Based on the inverter user manual unpacking list.
- The Unit × 1
- User Manual × 1
Package contents are listed according to the available user manuals. Cables and additional installation accessories are not included unless otherwise stated.
Specifications
24V 200Ah Plus Battery
| Battery Model | 24V 200Ah Plus LiFePO4 Battery |
| Rated Voltage | 25.6V |
| Capacity | 200Ah |
| Energy | 5,120Wh |
| Standard / Maximum Continuous Charging | 40A / 250A |
| Max Continuous Discharge Current | 250A |
| Standard Charging Voltage | 29.2V ±0.2V |
| Cycle Life | 6000 cycles @80% DOD |
| Self-Discharge Rate | ≤3% per month |
| Series & Parallel Connection | Max. 2 series / 4 parallel |
| Dimensions | 25.00 × 9.61 × 8.58 in / 63.5 × 24.4 × 21.8 cm |
| Weight | 101.74 lb / 46.1 kg |
| Protection Rating | IP65 |
| Case Material | ABS+PC / UL94-V0 |
| Terminal Bolt Size | M8 |
| Battery Pack Certifications | IEC62133 / RoHS / CE / FCC / UN38.3 / Class 9 |
| Cell Certifications | UL1642 / UL2580 / UN38.3 |
| Storage Temperature | 32°F to 140°F / 0°C to 60°C |
24V 4200W Inverter Output
| Inverter Model | 4.2kW / 24V |
| Rated Output Power | 4200W / 4.2kW |
| Output Waveform | Pure Sine Wave |
| Output Voltage Regulation | 230V AC ±5% |
| Output Frequency | 50Hz |
| Surge Capacity | 2× rated power for 5 seconds |
| Peak Efficiency | 93% |
| No-Load Power Consumption | 35W |
| Nominal DC Input Voltage | 24V DC |
| Cold Start Voltage | 23.0V DC |
| Low DC Cut-Off Voltage | 20.5V at load below 50% / 20.0V at load of 50% or above |
| High DC Cut-Off Voltage | 33V DC |
Solar & Charging
| Charging Algorithm | 3-Stage Charging |
| Maximum AC Charging Current | 100A |
| Bulk Charging Voltage | 29.2V for flooded battery / 28.2V for AGM or gel battery |
| Floating Charging Voltage | 27V DC |
| Solar Charger Type | MPPT |
| Maximum PV Array Power | 6200W |
| Nominal PV Voltage | 240V DC |
| PV Array MPPT Voltage Range | 60–500V DC |
| Maximum PV Array Open-Circuit Voltage | 500V DC |
| Maximum AC + Solar Charging Current | 120A |
AC Input & Power Sources
| Nominal AC Input Voltage | 230V AC |
| Input Voltage Waveform | Sinusoidal, utility or generator |
| Acceptable AC Input Range | 90–280V AC in Appliance Mode / 170–280V AC in UPS Mode |
| Maximum AC Input Voltage | 300V AC |
| Nominal Input Frequency | 50Hz / 60Hz, auto detection |
| Transfer Time | 10ms typical in UPS mode / 20ms typical in Appliance mode |
| Output Source Priorities | Utility First / Solar First / SBU Priority / MKS Priority |
| Charging Source Priorities | Solar First / Solar and Utility / Solar Only |
General & Protection
| Safety Certification | CE |
| Inverter Dimensions | 356 × 442 × 116 mm / 35.6 × 44.2 × 11.6 cm |
| Inverter Net Weight | 8.0 kg / 17.6 lb |
| Operating Temperature Range | -10°C to 50°C |
| Storage Temperature | -15°C to 60°C |
| Humidity | 5% to 95% relative humidity, non-condensing |
| Display | LCD display with function buttons |
| Output Short-Circuit Protection | Circuit breaker |
| Overload Protection | 3 seconds at ≥150% load / 5 seconds at 101%–150% load |
| Automatic Restart After Overload | Configurable |
| Automatic Restart After Over-Temperature | Configurable |
Specifications are based on the product user manuals. Runtime and output performance may vary depending on appliance power, startup load, wiring, battery condition and installation environment.