Μπαταρία Humsienk 12V 100Ah Max Plus LiFePO4 (110A BMS)
Η μπαταρία βαθιάς εκφόρτισης Humsienk 12V 100Ah Max Plus LiFePO4 διαθέτει ισχυρό BMS 110A και πρισματικά στοιχεία A+ LiFePO4 κατηγορίας EV, εξασφαλίζοντας εξαιρετική διάρκεια ζωής άνω των 6.000 κύκλων στο 80% DoD. Παρέχοντας 1.280Wh αξιοποιήσιμης χωρητικότητας στο συμπαγές της μέγεθος, διαθέτει ισχυρή αποθήκευση ενέργειας διατηρώντας παράλληλα εύκολη εγκατάσταση. Ιδανική για RV, συστήματα ηλιακής ενέργειας, θαλάσσιες εφαρμογές και άλλες εγκαταστάσεις εκτός δικτύου.
- Κατασκευασμένο από 4 πρισματικές κυψέλες EV κατηγορίας A+
- 6000+ κύκλοι στο 80% DoD, διάρκεια ζωής 10+ ετών
- Οι προστασίες 100% 110A Smart BMS περιλαμβάνουν υπερφόρτιση, υπερεκφόρτιση, υπερένταση, βραχυκύκλωμα, διακοπή χαμηλής θερμοκρασίας
- 1280Wh αξιοποιήσιμη ενέργεια, μέγιστη ισχύς εξόδου 1408W
- L256 × W194 × Υ213 mm — Μέγεθος μπαταρίας BCI Group 24, μπαταρίες AGM 100Ah με δυνατότητα drop-in
- 13 κιλά, 30% μικρότερη και το 1/3 του βάρους της μπαταρίας μολύβδου-οξέος 12V 100Ah
- Ευέλικτη σε σειρά και παράλληλα (Μέγιστο 4P4S, έως 20,48 kWh)
- IP65 αδιάβροχο, ανθεκτικό στην υγρασία και τη σκουριά
- Πιστοποιημένο κατά IEC62619, CE-EMC, CE-RoHS, CE-Battery, FCC-SDoC, UN38.3 και MSDS
- Κατάλληλο για οικιακή αποθήκευση ενέργειας, ηλιακή ενέργεια, θαλάσσια, τροχόσπιτα, καροτσάκια γκολφ, κινητήρες συρτής, UPS και πολλά άλλα
- 3 τρόποι φόρτισης &αμπέρ; Μέγιστη φόρτιση και εκφόρτιση 110A
- Συνιστώμενος φορτιστής: Φορτιστής 14,6V 20A LiFePO4
- Σημείωση: Η μπαταρία είναι κατάλληλη για χρήση ως μπαταρία βαθιάς εκκένωσης αντί για μπαταρία εκκίνησης
Product Data
| SKU | HS12V100AH110MAXPLUS |
| Category | LiFePO4 Deep Cycle Battery |
| Dimensions (L x W x H) | 256 x 194 x 213mm |
| Approx. Weight | 13.04 kg |
| Terminal Type | M8 |
| Dangerous goods classes | 9 |
| Certification | IEC62619, CE-EMC, CE-RoHS, CE-Battery and FCC-SDoC |
| Case Material | ABS |
| Enclosure Protection | IP65 |
Electrical Data
| Nominal Voltage | 12.8V |
| BMS Low Voltage Cutoff | 10V |
| Nominal Capacity | 100Ah |
| Energy | 1280Wh |
| Output Power | 1408W |
| Self Discharge | < 3% / month |
Discharge Data
| Max. Continuous Discharge Current | 100A |
| BMS Discharge Cut-Off Current | 300A±50A |
| Short Circuit Protection | Yes |
Charge Data
| Recommended Charge Current | 20A (0.2C) |
| Maximum Charge Current | 110A |
| Recommended Charge Voltage | 14.4V-14.6V |
| BMS Charge Cut-Off Current | 130A±30A |
| Maximum Batteries in Series | 4 |
| Maximum Batteries in parallel | 4 |
Temperature Data
| Discharge Temperature | -20ºC to 65ºC |
| Charge Temperature | 0ºC to 55ºC |
| Storage Temperature | 0ºC to 60ºC |
| BMS High Temperature Cut-Off | 60ºC to 75ºC |
| BMS Low Temperature Cut-Off | -25℃ to 5℃ |
- Search & Click to download the App: Search for "HumSienk Smart BMS" on Google Play or the Apple Store, and click to download.
- Perform basic setup & Accept terms: Allow the app to access your phone’s Bluetooth and Wi-Fi.
- Connect your Bluetooth battery: One way is to click the search icon in the upper right corner, find your Bluetooth battery, and connect; another way is to open the scan button in the search box and scan the QR code on your Bluetooth battery.
- Select the preferred language: There is a language selection box at the top of the app. Currently supported languages include Chinese, English, Japanese, Spanish, French and Dutch.
0Αχ
Ονομαστική χωρητικότητα
0W
Ισχύς εξόδου
0Τι
Πιο χρήσιμη ενέργεια
0ΕΝΑ
Μέγιστη φόρτιση & Ρεύμα εκφόρτισης
BMS Upgraded. Best Budget 12V 100Ah
Intergrated with 4 x 3.2V 100Ah EV grade A+ prismatic LiFePO4 cells and 110A advanced BMS, this battery deliveries massive 1280Wh of usable energy and 1408W output power, and supports 6000+ cycles at 80% DoD and 10+ years lifetime.
Ready for Any Environment
The LiFePO4 deep cycle battery charging temperature is between 0°C and 55°C, and the discharge temperature is between -20°C and 65°C. The built-in 110A BMS with an automatic low-temperature cut-off adds an extra layer of reliability, intelligently cutting off charging below 0°C and discharging below -20°C to safeguard the battery.
AGM vs. Max Plus LiFePO4
With dimensions of L256 x W194 x H213 mm, this battery’s compact design stands out, especially when compared to traditional AGM options. Weighing just 13.04 kg, far less than the 22.55 kg of 12V 100Ah AGM battery, easier to handle and install in tight spaces like RVs or boats.
Compact Power for Endless Adventure
A 100Ah Max Plus LiFePO4 deep cycle battery can power your TV for 12.8 hours, your bread maker for 8.5 hours, your microwave for 2.56 hours or your air conditioner for 1.82 hours.
Up to 20.48kWh to Power any Adventure
Customize your power setup with Humsienk LiFePO4 deep cycle batteries to fit your needs. Connect 4 batteries in series, 4 in parallel, or a mix of both to create a tailored power backup. Up to 16 12V 100Ah Max Plus batteries can form a 48V 400Ah battery system, releasing 20.48kWh of energy and 25.528kW of output power.
Perfect for RV, Yacht, Solar, and Off-Grid
This 100Ah Max Plus LiFePO4 deep cycle battery adapts to various setup. Its scalability extends the max usable energy to 20.48kWh, perfect for larger setups.
Συχνές ερωτήσεις
No, this battery is a deep-cycle battery designed for energy storage and not for the high, short-burst current required for starting an engine. Its 110A continuous discharge are tailored for devices like refrigerators or air conditioners, not the high cranking power needed for car engines.
All Humsienk LiFePO4 batteries have built-in powerful BMS, which has multiple protections such as overvoltage, overcurrent, extreme temperature, short circuit, etc.
Built-in advanced 110A Battery Management System (BMS) offers comprehensive protection.
- Overvoltage Protection: The BMS shuts down the charging interface if the battery voltage is too high. The voltage of a single cell should not exceed 3.65V. When the single-cell voltage drops to a certain value, the charging interface is reopened.
- Deep Discharge / Undervoltage / Overload Protection: When the battery votage drops under 10V, the BMS shuts down the battery. It can only be activated when the battery is fully charged.
- Passive Balancer: Passive balancing is activated when the voltage of a single cell exceeds 3.4V and the voltage difference among the four cells exceeds 30mV.
- Extrem Temperature Protection: If the battery temperature is too low/high (-20°C - 60°C), the BMS shuts down the battery. Only when the battery temperature returns to normal does the BMS automatically switch the battery on.
- Charging Current Protection: If the charging current is too high, the BMS will shut down the battery. Typically, the charging current of our batteries does not exceed 1C. The standard charging current of the battery is 0.2C - 0.5C.
The dimensions are 256 x 194 x 213 mm, which is slightly larger than 12V 100Ah. The weight is 13.04 kg.
Humsienk 12V 100Ah Max Plus LiFePO4 deep cycle battery is equipped with 4 x 3.2V 100Ah EV grade A+ prismatic LiFePO4 cells and 110A BMS, delivering 1280Wh of usable energy and 1408W output power. Ideal for high-demand applications, LiFePO4 for RVs, Solar & Marine.
Approximate 2.56 hours.
Assumed close to 100% efficiency, 500 Watts divided by 12.8 Volts is about 39A. If you run the battery dead 100Ah divided by 39A is about 2.56 hours.
- For Regular Version: Humsienk recommends you purchase the 500A battery monitor.
- For Bluetooth Version: Built-in Bluetooth 5.0, can be monitored via the HumSienk Smart BMS App. Bluetooth Guide.
There are three general charging methods: AC-DC LiFePO4 charger,solar panel charging and DC generator charging.
Charging Voltage: 14.4V-14.6V
Recommended Charge Current: 20A (0.2C)
Typically, LiFePO4 lithium batteries can be charged at a rate of 0.2C to 0.5C, where C is the capacity of the battery in ampere-hours (Ah). So, this 100Ah Max Plus LiFePO4 battery can be charged at a standard rate of 20A (0.2C) to 50A (0.5C).
No, this is not recommended. All Humisenk LiFePO4 batteries are deep cycle batteries. Using a charger not specifically designed for LiFePO4 batteries may result in overcharging and damage to the LiFePO4 battery cells.
All Humsienk LiFePO4 deep cycle batteries are charged within a range of 0°C to 55°C and feature low temperature cut-off protection. When the ambient temperature is below 0°C, the BMS will cut off to protect the battery. Charging in freezing temperatures will damage the battery cells.
Yes. It is built in with low-temperature protection to prevent the battery charging below 0°C, discharging below -20℃.
Yes. Humsienk 12V 100Ah Max Plus LiFePO4 deep cycle batteries can be connected in series to increase the voltage to 24V, 36V, or 48V for an off-grid power system. For maximum power output, you can first wire the batteries in series, then connect the sets of batteries in parallel (do use batteries of the same model and generation) to achieve up to 20.48kWh.
⚠️ Critical Connection Requirements
- Same brand: The batteries need to be of the same brand, as the cells and BMS of other brands of batteries may be different from those used by Humsienk.
- Same Battery Model: Using the exact same battery model with the same voltage (V), capacity (Ah), and BMS rating (A).
- Purchased in the last three months: Ensuring they are from the same manufacturing batch for balanced performance.
Tips: Before connecting batteries in series or parallel, each battery needs to be fully charged.
To store LiFePO4 lithium batteries for an extended period, you must ensure that the temperature is favorable. Humsienk recommends 10°C - 40°C. The storage space should be dry and indoors, away from direct exposure to sunlight. When not in use, keep the battery level between 40% and 60%, and charge it approximately 10% every 2-3 months.
- Size Difference: The 12V 100Ah battery size is L260 x W168 x H209 mm, while the 12V 100Ah Max Plus battery size is L256 x W194 x H213 mm.
- BMS Difference: The BMS of a 12V 100Ah battery is 100A, while the BMS of a 12V 100Ah Max Plus battery is 110A. This means that the 12V 100Ah battery supports a maximum continuous charge and discharge current of 100A, while the 12V 100Ah Max Plus supports a maximum continuous charge and discharge current of 110A.
